与众不同的特点:1、模板中心厚
模板在夹紧模具的部位,具有足够的厚度，以保证对模具进行有效的夹紧和支撑。在非支撑部位做整体强度配合，达到模板整体夫人均衡稳定，减少模板变形，提高成型质量，保护模具，延长模具使用命。
有一些传统的老式结构往往在支撑模具的中心部位比较薄弱，在非支撑的模板边缘做加强筋结构，这样模板看上去比较厚，造成一个可靠的假象，但实际效果并不理想。Platen center is thick enough
The enough thickness of platen clamping part ensures that the mold is clamped and supported effectively. Entire strength cooperation in unsupported part guves mold overall balance and stability, reduces platen deformation, improves moulding quality, protects mold, and extends mold's service life.
Some traditional old-type structure is weak in the platen center for mold supporting. Instead of that,it applies reinforcing rib structure in unsupporetd platen edge. So the platen looks thick and makes a reliable illusion, but the actual effect is not so good.2、连体连杆
前连杆全部采用整体连体结构，大幅度提高了连杆的强度，同时也提高整个锁模机构的刚性和精度。Linking connecting rod
Linkage structure of front connecting rod increases connecting rod's strength greatly, as well as the whole clamping unit's rigidity and accuracy.3、增强的头板
头板中心孔部位对模具有着重要的支持作用，我们采用自主结构的支撑加强筋，对模具中心的支撑效果有效提高，有利于提高成型质量和稳定性。Enhanced stationary platen
The central hole part of the stationary platen is significant in supporting function. Our selfowned patent of the reinforcing rib supports mold center effectively,favors moulding quality and stability.4、特殊定制优化的控制系统
根据我们10余年专业经验，再结合控制系统供应商的控制技术，定制开发出控制程序，以提高机台整体性能。Special customized and optinized control system
According to our more than ten years professional experience and control system supplier's technique, we develop specialized and customized control program to improve machine's overall performance.5、含油铜套的射台后板
每一次注射动作，射台后板都要进行一次往复动作。注射部分的润滑通常是非自动润滑，这样就造成了这个重要动作没有润滑支持，因此，我们采用含油材料的铜套，可以不需要润滑油的支持也能有良好的滑动效果，这样可以保证良好的注射往复动作。
一些因为考虑成本而采用的非含油材质，在使用过一段时间后往往会对注射动作的精度产生不良影响。Injection preplastication seat with oilcopper sleeve
The preplastiction seat reciprocates once in every injection motion. Normal non-automatic lubrication in injection unit can't offer lubrication support to this important motion.
