If you have not used this device in the last time, then use it, and take the initiative to check the device to see if there is dust. If there is dust, remove it. You can use a cotton swab to pick up alcohol and wipe the grating. Then check if the ground wire is connected. If it is normal, it is turned on. Do not print immediately after the machine. Wash the nozzle first. Mainly to eliminate the air inside the nozzle. Then, in the process of pumping ink, it is necessary to pay attention to whether the pipeline of the waste ink in the lower row is blocked. After these checks are completed, you can run it. When you run it, you should also see if the car runs smoothly.
For the daily operation of the YSL-S200 Sublimation Flag Machine, we must comply with the relevant instructions for safe production. Although the use of this device is not complicated, the correct operation cannot be ignored. Do not change the manufacturer's settings during use. We strongly recommend that operators perform relevant training and be qualified before they can be employed. For the dismantling and disassembling of the nozzle of the flag machine, it is necessary to strictly follow the steps. Disassembly and assembly of components should be performed under the power-off cleaning. Proper operation and maintenance can increase the service life of the equipment, thereby saving procurement costs and creating benefits.