| 型号规格 Specifications | 单位 UNIT | CH1300F | ||
| 号International size rating | 9480 | |||
| 注射装置 INJECTION UNIT | A | B | C | |
| 螺杆直径 Screw diameter | mm | 105 | 115 | 125 |
| 螺杆长径比Screw L/D ratio | L/D | 23 | 21 | 19 |
| 理论注射容Theoreticai shot volume | cm3 | 4979 | 5972 | 7056 |
| 注射量 Shot weight(PS) | g | 4531 | 5435 | 6421 |
| OZ | 159.8 | 191.7 | 226.5 | |
| 注射压力 Injection pressure | Bar | 1904 | 1587 | 1343 |
| 注射速率 Injection rate(PS) | g/s | 798 | 857 | 1131 |
| 射胶行程 Injection stroke | mm | 575 | ||
| 螺杆转速 Max.screw speed | rpm | 99 | ||
| 塑化能力Plasticizing capacity(PS) | g/s | 95.0 | 106.5 | 152.3 |
| 射嘴接触力Nozzle sealing force | KN | 216 | ||
| 锁模装置 CLAMPING UNIT | ||||
| 锁模力 Clamping force | KN | 13000 | ||
| 开模行程Opening stroke | mm | 1300 | ||
| 拉杆内间距Distance between tie-bars | mm | 1350x1250 | ||
| 最小模具尺寸Min mould dimension | mm | 880x815 | ||
| 最小模厚 Max.mold height | mm | 1260 | ||
| 最小模厚Min.mold height | mm | 500 | ||
| 模板开距MAX.Dalylight | mm | 2560 | ||
| 顶出行程 Ejector stroke | mm | 320 | ||
| 顶出力 Ejector force | KN | 215 | ||
| 顶出数 No.of ejector pins | PCS | 16+1 | ||
| 其它 OTHERS | ||||
| 系统压力 System pressure | Mpa | 16 | ||
| 油泵排量 Hydraulic pump capacity | CC | 188+125 | ||
| 电马达功率Drive mootor power | kw | 75+45 | ||
| 电热功率Heator Power | kw | 75 | ||
| 加热段数 No.of heater zones | pcs | 6+1 | ||
| 外形尺寸Machine dimensions(LxWxH) | m | 12x3x2.75 | ||
| 理论机重 Machine weight | Tom | 62 | ||
| 邮箱容积 Oil tank capacity | L | 1500 | ||
| 模板正面尺寸图 Platen dimensions | ||||
| 模板侧面尺寸图 Mould space dimensions | ||||
