进口单级单吸蜗壳泵

进口立式单级单吸蜗壳泵

进口立式单级单吸蜗壳泵性能范围：

扬程：10~60m（m）  吸入口径：1200（mm） 流量：0.53~8.08（m3/h）转速：3000（rpm）

进口立式单级单吸蜗壳泵工作原理以及结构：

旋蜗壳泵是由泵体、支架体、盖、轴、上轴承部件、下轴承部件、叶轮、吸入弯管和底座，其中支架体位于泵体顶部，吸入弯管和底座位于泵体底部，泵轴、上轴承部件和下轴承部件位于支架体内，叶轮位于泵体内，吸入弯管和底座为一体式结构，上轴承部件和下轴承部件分别通过螺栓固定在支架体内，支架体通过螺栓连接在泵体顶部。

立式蜗壳泵将吸入弯管与底座合为一个零件，增大了吸入弯管的强度与刚度，能够承受更大的流动介质的作用力，降低泵体的振动;泵盖与支架体合为一个零件，结构简化，便于维护检修;上、下轴承部件可一起从支架体中取出，便于维护检修。

进口立式单级单吸蜗壳泵技术参数：

流量：0-2600m3/h(m3/min、L/min、L/s、L/h)
扬程：0-1200m
转速：0-2900r/m
口径：0-500mm
电压：220/380V
密封：NBR、EPDM、硅橡胶、PTFE、机械密封
电机功率：0.18-300KW
工作压力：0-200MPa
产品材质：塑料，铝合金，铸铁，铸钢，不锈钢304、316、316L，合金钢

进口立式单级单吸蜗壳泵美国泰乐TYLER售后服务：

一流的服务铸就*的企业让客户无后顾之忧。
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底。

Vertical single stage single suction volute pump

Performance range of imported vertical single stage single suction volute pump:

Head: 10~60m (m) suction diameter: 1200 (mm) flow: 0.53~8.08 (m3/h) speed: 3000 (RPM)

The working principle and structure of vertical single stage single suction volute pump:

Rotary volute pump is composed of a pump body, a support body, cover, shaft, bearing parts, bearings, impeller, suction elbow and the base, the bracket body is positioned at the top of the pump body, suction elbow and the base is located at the bottom of the pump body, pump shaft, bearing parts and bearing parts in the bracket body, the impeller is located the pump body, suction elbow and the base is an integral structure, the upper bearing member and the lower bearing parts are respectively fixed on the bracket body through bolts. The bracket body is connected to the top of the pump body by bolts.

Vertical volute pump suction elbow and the base are combined as a part, increasing the suction bend strength and stiffness, force can withstand greater flow of media, to reduce the vibration of the pump body; the pump cover and the bracket of a body parts, simple structure, convenient maintenance and repair; upper and lower bearing parts can be go out of the bracket body, convenient in maintenance and repair.

Technical parameters of imported vertical single stage single suction volute pump:

Flow rate: 0-2600m3/h (m3/min, L/min, L/s, L/h)

Lift: 0-1200m

Speed: 0-2900r/m

Caliber: 0-500mm

Voltage: 220/380V

Seal: NBR, EPDM, silicone rubber, PTFE, mechanical seal

Motor power: 0.18-300KW

Working pressure: 0-200MPa

Product material: plastic, aluminum alloy, cast iron, cast steel, stainless steel 304, 316, 316L, alloy steel

Imported vertical single-stage single suction volute pump the TYLER customer service service taylor:

The first-class service created a first-class enterprise so that customers no worries.

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end.

进口立式单级单吸蜗壳泵guan网：http://www.twvalve。。ｎｅｔ/html/2275.html