3G80×3CR40Y160L-4B5铁人兵神螺杆泵

3G80×3CR40Y160L-4B5铁人兵神螺杆泵--谁知道3G80×3CR40Y160L-4B5的价格怎么样?有哪些比较出名的厂家或者供应商吗?听朋友说有个叫做黄山铁人泵业的公司,专门生产、销售3G80×3CR40Y160L-4B5————网上找螺杆泵很纠结？选择太多？真假难辨？价格没底？——找杜工不纠结,专注螺杆泵15年

SMT 16B - 螺杆泵
产品介绍 > SMT 16BSMT 16B中低压无噪音螺杆泵
         
        SMT16B 泵是一款工业用三螺杆泵，适合低中压（40 巴）下使用。SMT16B泵是一款可靠的低噪音设备，适用于要求使用寿长且成本低的应用领域。SMT16B泵是一款装配于泵体内的灌液泵。泵体和螺杆的设计可避免产生任何轴向荷载。功能压力在主螺杆的平衡活塞与周围泵体之间形成容差。这会在螺杆上产生平衡水动力，同时润滑和冷却密封组件。抽出的流体以液压方式传输移动侧面螺杆所需的扭矩。这意味着螺杆旋转过程中不会发生磨损。

        通过采用高质量的螺杆制造工艺，确保其噪音和脉动极小。

        按照几何设计，三个螺杆间形成了密封腔。在螺杆旋转过程中，主螺杆形成某种类型的空腔，它容纳水流并将水流按轴向从入口排出至出口端口。SMT泵可配内置或外置式泄压安全阀。SMT16B 与 SMT 泵相比，其螺杆更短，适用于空间有限的应用场景。

        ?Hide technical details
              TypesDry (SMT16B) or submerged (SMIT16B)
              Models20 - 25 - 32 - 40 - 45 - 55 - 60 - 70 - 80 - 90 - 110 - 125
              - 150 - 180
              InstallationFree for SMT16B. Submerged (totally or partially) for
              SMIT16B - Foot mounted for model 125 and up.
              FlangesISO 3019/2
              ConnectionsSAE 3000 - BSPP
              Drive loadingNo axial or radial loads
              Shaft rotationClockwise (from shaft end) , (suitable also for
              counter clockwise rotation)
              FlowsFrom 4 up to 3.200 L/min (for model 20 to 110) - From 1.700
              up to 4.900 L/min (for model 125 and up)
              Outlet PressureUp to 40 bar
              Inlet PressureMin. -0.7 bar max. 3 bar(2)
              Fluids(3)? Ecologic fluids HETG, HEPG, HEE
              ? Synthetic fluid or emulsion: HFA oil-water emulsion, HFB
              water-oil emulsion 40% of volume, HFC water/ glycole – water max
              35 to 55%, HFDR phosphate ester
              ? Lubrication high viscosity oils
              ? Special synthetic fluid: MIL-H, SKYDROL,
              ? Fuel oil: MGO, MDO, Low sulfur MDO and HFO
              ? DMX (ISO8217), DMA, DMB, DMC, DMZ
              ? Bunker oil, furnace oil, engines oil, heating oil, hydraulics
              oils DIN 51524
              ViscosityFrom 2 up to 10.000 cSt(4)
              Seals polymer (shaft, O-ring)NBR, FKM, EPDM (5)
              Seal typeTM, TMK, TMZ, FGM
              Acoustic EmissionsFrom 52 up to 68 db(A) at 2.950 rpm value based
              on ISO 4412 test procedure
              Pump BodyAluminum alloy
              Pump body (special applications)
              Cast iron, steel. Hardened steel and stainless steel available on
              request

              ScrewsSteel for main screw , idler cast iron
              Screws (special applications)Core hardened steel screws, surface
              treated screws
              Environment TemperatureFrom - 50 ° up to + 100°C (6)
              Hydraulic TemperatureFrom - 50° C up to + 300° C (6)
              FiltrationPermissible degree of fluid contamination NAS to 1638
              class 10 or ISO DIS 4406 – 19/16. Recommended filtration ? 25 ≥ 75
        (1)For shaft speed lower than 1.000 rpm and over 1.800 rpm please
        contact Settima.
        (2)For higher pressure please contact Settima.
        (3)For request of different fluids please contact Settima.
        (4)For level of viscosity lower than 20 cSt and over 320 cSt please
        contact Settima.
        (5)For special seals please contact Settima.
        (6)For higher/lower temperature please contact Settima.
        产品应用工业

        船舶

        过滤

        冷却

        润滑

        压机

        油气

        发电

        机床

        风车

        产品优势粘度低

        脏流体

        流动性高

        燃油

        无噪音

3G80×3CR40Y160L-4B5铁人兵神螺杆泵