东莞市茶山创力注塑机经营部
东莞市茶山创力注塑机经营部
| 型号规格 Specifications | 单位 UNIT | CH250F | ||
| 号International size rating | 780 | |||
| 注射装置 INJECTION UNIT | A | B | C | |
| 螺杆直径 Screw diameter | mm | 45 | 50 | 55 |
| 螺杆长径比Screw L/D ratio | L/D | 22 | 20 | 18 |
| 理论注射容Theoreticai shot volume | cm3 | 374 | 461 | 558 |
| 注射量 Shot weight(PS) | g | 340 | 420 | 508 |
| OZ | 12.0 | 14.8 | 17.9 | |
| 注射压力 Injection pressure | Bar | 2102 | 1702 | 1407 |
| 注射速率 Injection rate(PS) | g/s | 145 | 180 | 217 |
| 射胶行程 Injection stroke | mm | 235 | ||
| 螺杆转速 Max.screw speed | rpm | 180 | ||
| 塑化能力 Plasticizing capacity(PS) | g/s | 21.5 | 27 | 33 |
| 射嘴接触力Nozzle sealing force | KN | 83 | ||
| 锁模装置 CLAMPING UNIT | ||||
| 锁模力 Clamping force | KN | 2500 | ||
| 开模行程 Opening stroke | mm | 485 | ||
| 拉杆内间距Distance between tie-bars | mm | 570x520 | ||
| 最小模具尺寸Min mould dimension | mm | 370x345 | ||
| 最小模厚 Max.mold height | mm | 550 | ||
| 最小模厚 Min.mold height | mm | 200 | ||
| 模板开距MAX.Dalylight | mm | 1035 | ||
| 顶出行程 Ejector stroke | mm | 140 | ||
| 顶出力 Ejector force | KN | 62 | ||
| 顶出数 No.of ejector pins | PCS | 8+1 | ||
| 其它 OTHERS | ||||
| 系统压力System pressure | Mpa | 16 | ||
| 油泵排量 Hydraulic pump capacity | CC | 80 | ||
| 电马达功率Drive mootor power | kw | 22 | ||
| 电热功率 Heator Power | kw | 11.5 | ||
| 加热段数 No.of heater zones | pcs | 4+1 | ||
| 外形尺寸 Machine dimensions(LxWxH) | m | 5.5x1.65x2.15 | ||
| 理论机重 Machine weight | Tom | 7.8 | ||
| 邮箱容积Oil tank capacity | L | 300 | ||
| 模板正面尺寸图 Platen dimensions | ||||
| 模板侧面尺寸图 Mould space dimensions | ||||
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
包装印刷产业网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
