JSR1803航空燃料冰点测定器 一、符合GB/T2430和IS03013标准 二、主要技术参数: 控温范围:常温~-70℃ 控温精度:±0.5℃ 控温方式:进口山武数显温控仪自动控温 搅拌方式:电机搅拌 试样孔数:单孔 整机功率:1.7KW 工作电源:AC220V±10% 50HZ 三、性能及特点: 1、采用复叠式压缩机制冷,制冷量大,降温速度快,温度可达-70℃。 2、采用杜瓦瓶保温,观察试样的结晶状态十分方便。 3、采用电热管加热和压缩机致冷方式调节恒温浴温度,既能升温又能降温,确保恒温浴温度能恒定在-70℃~常温之间的任一点。 JSR1803 jet fuel freezing point tester I. It conforms to GB/T2430 and IS03013 standards Ii. Main Technical parameters: Temperature control range: normal temperature ~ -70℃ Temperature control accuracy: ±0.5℃ Temperature control mode: Imported Shanwu digital temperature controller automatic temperature control Stirring mode: motor stirring Sample hole number: single hole Machine power: 1.7KW Power supply: AC220V± 10% 50HZ Iii. Performance and Characteristics: 1, the use of multiple compressor refrigeration, large cooling capacity, fast cooling speed, the lowest temperature up to -70℃. 2. Dewar bottle is used for insulation, and it is very convenient to observe the crystallization state of the sample. 3, the use of electric heat pipe heating and cooling compressor to adjust the temperature of the constant temperature bath, can not only heat up and cool down, to ensure that the constant temperature of the constant temperature bath can be kept in -70℃ ~ room temperature at any point. |