E21系统控制后挡料
应用：
虽然不是为了精确或高生产需要，一个联合冲剪机可以快速的加工许多不同类型的材料，并执行许多不同的过程，必须在一个工厂车间。材料如：板、管、角钢、棒料都可以加工。能够冲压、剪切、弯曲、开槽和剪角，是在任何制造或焊接车间中极其灵活、多功能和必要的机器。
标准配置
1，坚固钢架
2，带刻度的大型冲压台
3，2个独立液压缸
4，2个脚踏板控制
5，2个大模具开口，用于大尺寸冲孔
7，5个广泛应用的工作站
8，所有5个工作站上的电源点动
9，剪板台和剪角台
10，可调行程控制装置
11，冲床：活动工作灯
可选功能
1，液压系统的可选过载保护
2，可选电动后挡料
3，冲孔法兰、槽钢和横梁用可拆卸垫枕
4，可选两缸同时工作
5，可选各种冲孔折弯模具
Punching Station
The design of the bolster plate, makes it possible to perform a wide range of punching. This includes the punching of flat bar, flange, angle, and channel. The station comes standard with quick change punch and die holders, as well as a swing away stripper. Also included are x & y coordinate gauge stops. This feature is useful for repetitive work.
Section Cutting
This station comes standard with blades for cutting solid round and square stock. Alternatively, it can be equipped with easily removable blades for cutting tees, channel, and I-beam profiles. There is also an adjustable hold down for clamping the profile during the cutting process.
Angle Cutting
Blades are four sided and easily installed and rotated. The cavity is designed in such a way to allow mitering at 45° angle. An easy adjustable hold down provides for proper clamping of the material while it is being sheared.
Notching
This station comes standard with rectangular notching blades which allow side notching, therefore allowing notching of unlimited widths. Vee notching blades can easily be installed, and are available as an option.
