台式胶装机DL788-2 手动胶装机 桌面胶装机 桌面型胶装机 小型胶装机 精装标书设备

产品名称：台式胶装机—新增铣刀铣背功能，装订更牢固
 新增齿轮链条制动，轻松耐用
产品型号：DL788 精装版
　　产品介绍：台式手动无线胶装机是专为办公室人员设计开发的桌面式无线胶装机，具有体积小、操作方便、维护简单等特点。适合标书、论文、会议文件、财务凭证等小批量、多批次文档资料装订的需求，达到书籍装祯效果。可进行硬壳精装制作。
　　与世面上的台式手动无线胶装机相比，控温更精准，并且新增了铣刀开脊功能，在胶装之前铣刀能给书脊开槽，装的更牢固！

技术参数 ：

zui大制本：310＊430mm
制本厚度：两张纸-50mm
机器用电：220V/（50Hz-60Hz）
机器尺寸：700＊360＊500mm
机器重量：25kg
装订速度：180本/小时
厂价直销：
随机附件：
1、说明书
2、合格证
3、保修卡
4、胶一袋
5、工具一套
6、厚、薄推纸板各一副

国外用户参数：

Packing list: 
1,1 unit of machine
2,1 set of soft cover template
3,1 set of hard cover template
4,1 pcs of cable
5,1 pcs of cross screw-driver
6,1 pcs of M5 hexagonal socket spanner
7,1 operate manual
 
     Precaution:
 1, connect to the specified power supply110Vv/50Hz.Open glue box cover, put in the solid glue.
   Note: A, the glue should be cleanwithout any sundries.
             B, Regularly add the glue particles into the glue box according to glue slurry consumption. Thus a proper amount of glue slurry can be continuously supplied.
 2,Turn on the switch, the glue to be heated under 170 degree about 15-20 minutes. During period of heating, don’t move the glue box to avoid damage. Pay special attention to avoid the glue box touching with hard thing during operating.
 3,Check the template on the machine is accordant to the cover of binding file.e.g. soft cover matches soft cover templatehard cover file matches hard cover template
 4,put the paddle on “N” position.
 5,During the installation, if the gluing roller on the glee box is not parallel to the spine of the binding book, please adjust it according to “Adjustment of the gluing roller” section in this manual.
 6, Granulate bit’s position can be adjustable by adjusting four screws.