专门针对窄幅标签轮转加工设备设计的一种不停机放卷系统解决方案。
It is a designed non-stoppage unwinding system solution specially to narrow label rotary processing equipment.
特点:
Characteristics:
■ 采用零速全自动接纸方式,头对头对接接纸,自动双面粘贴连接胶带,可避免搭接接纸对印版的压伤及对模切刀具的损坏问题。
■ Adopt zero velocity full auto paper receiving mode, end to end butt paper receiving, auto double side stickup connection adhesive tape so as to avoid spoilage of die cutter and dinkey dint of overlapping paper registration.
■ 采用双工位不停机放卷,可以充分发挥设备的生产效率,可以大幅度降低设备的废品率。
■ Adopt double work position unwinding without stoppage. This can give full play to production efficiency of equipment and decrease the waste product rate of equipment greatly.
■ 整机设计精致,结构紧凑,操作方便简洁。
■ Precise design of complete machine, compact conformation, handiness and simplicity.
主要技术参数:
Main Technical Parameters:
■ zui大放卷直径: 500mm
■ Maximum unwinding diameter: 500mm
■ zui大放料幅宽: 330mm
■ Maximum unwinding width: 330mm
■ zui高接卷速度: ≥80米/分钟
■ Maximum roll receiving speed: ≥80m/min
■ 适用纸张克重: 60---350g/m2
■ Applicative paper weight: 60~350g/m2
■ 外 形 尺 寸: 1800×1000×2800mm (长X宽X高)
■ Overall dimension: 1800×1000×2800mm (length × width × height)
■ 总 重 量: 约1.8T
■ Total weight: About 1.8T
所示尺寸及技术参数以ZHJZ 330标准型号为准,仅作样式参考。