主要技术参数
| 系统 System | 项目 Item | 单位 Unit | 基本参数 Basic paramters |
|
基本规格 Basic Spec
| 适用原料 Plastic fit for |
| PE PP PVC PA… |
| 制品容量Max hollow product volume | L | 1.5 | |
| 机头数Diehead amount | set | 1、2、3、4 | |
| 机器外型尺寸（长x宽x高）Size(LxWxH) | M | 2.74×1.8×2.2 | |
| 机器重量Weight | ton | 4 | |
|
| |||
|
锁模系统 Clamping System | 锁模力Clamping force | kN | 33 |
| 模板间距Template distance | mm | 110-280 | |
| 模板行程Template stroke | mm | 170 | |
| 模具尺寸(宽x高)Max mould size(WxH) | mm | 340×320 | |
| 模具厚度Mould thickness | mm | 115-160 | |
|
| |||
|
挤出系统 Extrusion System
| 螺杆直径Screw Dia | mm | 50 |
| 螺杆长径比Screw L/D ratio | L/D | 25 | |
| 塑化能力（HDPE）Plasticizing capacity (HDPE) | Kg/h | 35 | |
| 螺杆加热段数Screw heating zone | zone | 3 | |
| 螺杆加热功率Screw heating power | kW | 6.3 | |
| 螺杆风机功率Screw fan’s power | kW | 0.42 | |
| 挤出电机功率Extrusion motor’s power | kW | 11 | |
|
|
| ||
|
模头 Die head | 模头加热段数Diehead heating zone | zone | 2 |
| 模头加热功率Diehead heating power | kW | 3.5 | |
| 挤出口模直径Sprue-die dia(max) | mm | 60 | |
|
| |||
|
能耗 Power | 总装机功率General power | kW | 27.5 |
| 油泵电机功率Oil-pump motor power | kW | 5.5 | |
| 气源压力Air pressure | Mpa | 0.6-0.8 | |
| 平均能耗Average power | kW | 14.3 | |
| 压缩空气用量Compressed air dosage | m3min | 0.4 | |
| 冷却水用量Cooling water dosage | L/min | 30-35 | |
