产品特点
微电脑程序控制，气动元件驱动。
胶辊旋转热烫印，胶辊以直线与加面接触，故
能克服大面积烫印与加工面之间的含残存空气
的缺点，能获得均匀美观的加工面。
设有高精度光电管(电眼)，对带接点的转印
纸进行跟踪到位控制，对无接点
的转印纸采用定时送纸的方式。
工作台行程可调，方便转印不同长度的工作。
烫印压力、温度、速度均可调。
内设四位自动计数器
机头高度可调，烫印头升降可微调。
自动送纸、收纸、井可调。
产品技术参数
胶辊尺寸 100 *102mm
烫印温度选择范围 室温~280度
转印面积 280x100mm
烫印压力 2138N (7br)
烫印速度 600pcs/hr
电源 220V 50Hz
发热功率 1000W
耗气量 78L/min
外形尺寸 960x61Oxl770mm
Product Features
Microcomputer program control, pneumatic drive.
Cots rotary hot stamping, plastic rollers on a straight line with the increase in surface contact, so
Overcome a large area with stamping and machining surface between the trapped air
Shortcomings, can obtain a uniform appearance of the machined surface.
With a high-precision optical tube (electric eye), with contacts for transfer
Paper in place for tracking control, non-contact
The timing of the transfer paper using the paper feed mode.
Adjustable worktable, to facilitate the work of the transfer of different lengths.
Stamping pressure, temperature, speed can be adjusted.
Equipped with four automatic counter
Height-adjustable head, stamping head movements can be fine-tuned.
Automatic document feeder, delivery, well adjustable.
Technical Parameters
Cots size 100 * 102mm
Stamping Temperature range from room temperature to 280 degrees
The maximum transfer size 280x100mm
Maximum stamping pressure 2138N (7br)
Maximum stamping speed 600pcs/hr
Power supply 220V 50Hz
Heating power 1000W
Air consumption 78L/min
Dimensions 960x61Oxl770mm
