| 型号规格 Specifications | 单位 UNIT | CH2100F | ||
| 号International size rating | 33900 | |||
| 注射装置 INJECTION UNIT | A | B | C | |
| 螺杆直径 Screw diameter | mm | 140 | 155 | 170 |
| 螺杆长径比Screw L/D ratio | L/D | 22.4 | 22.0 | 20.1 |
| 理论注射容积Theoreticai shot volume | cm3 | 15394 | 18869 | 22698 |
| 注射量 Shot weight(PS) | g | 14162 | 17360 | 20882 |
| OZ | 500 | 613 | 737 | |
| 注射压力 Injection pressure | Bar | 220.0 | 179.5 | 149.2 |
| 注射速率 Injection rate(PS) | g/s | 1220 | 1495 | 1798 |
| 射胶行程Injection stroke | mm | 685 | ||
| 螺杆转速Max.screw speed | rpm | 0-100 | ||
| 塑化能力 Plasticizing capacity(PS) | g/s | 176 | 228 | 288 |
| 射嘴接触力Nozzle sealing force | KN | 285 | ||
| 锁模装置 CLAMPING UNIT | ||||
| 锁模力 Clamping force | KN | 21000 | ||
| 开模行程 Opening stroke | mm | 1750 | ||
| 拉杆内间距 Distance between tie-bars | mm | 1780x1650 | ||
| 最小模具尺寸Min mould dimension | mm | 900-1900 | ||
| 最小模厚 Max.mold height | mm | 1900 | ||
| 最小模厚 Min.mold height | mm | 900 | ||
| 模板开距MAX.Dalylight | mm | 4050 | ||
| 顶出行程 Ejector stroke | mm | 450 | ||
| 顶出力 Ejector force | KN | 385 | ||
| 顶出数 No.of ejector pins | PCS | 32+1 | ||
| 其它 OTHERS | ||||
| 系统压力 System pressure | Mpa | 16 | ||
| 油泵排量Hydraulic pump capacity | CC | 188+163+163 | ||
| 电马达功率Drive mootor power | kw | 39x3 | ||
| 电热功率 Heator Power | kw | 75.3 | ||
| 加热段数No.of heater zones | pcs | 6+1 | ||
| 外形尺寸Machine dimensions(LxWxH) | m | 20x3.7x3.55 | ||
| 理论机重 Machine weight | Tom | 205.0 | ||
| 邮箱容积Oil tank capacity | L | 2700 | ||
| 模板正面尺寸图 Platen dimensions | ||||
| 模板侧面尺寸图 Mould space dimensions | ||||
