| 型号规格 Specifications | 单位 UNIT | CH800F | |||
| 号International size rating | 5390 | ||||
| 注射装置 INJECTION UNIT | A | B | C | ||
| 螺杆直径 Screw diameter | mm | 85 | 95 | 105 | |
| 螺杆长径比Screw L/D ratio | L/D | 23 | 21 | 19 | |
| 理论注射容积Theoreticai shot volume | cm3 | 2695 | 3367 | 4113 | |
| 注射量 Shot weight(PS) | g | 2453 | 3064 | 3743 | |
| OZ | 86.5 | 108.1 | 132 | ||
| 注射压力 Injection pressure | Bar | 2003 | 1604 | 1313 | |
| 注射速率 Injection rate(PS) | g/s | 548 | 684 | 836 | |
| 射胶行程 Injection stroke | mm | 475 | |||
| 螺杆转速 Max.screw speed | rpm | 129 | |||
| 塑化能力 Plasticizing capacity(PS) | g/s | 65.4 | 78.5 | 95 | |
| 射嘴接触力Nozzle sealing force | KN | 141 | |||
| 锁模装置 CLAMPING UNIT | |||||
| 锁模力 Clamping force | KN | 8000 | |||
| 开模行程 Opening stroke | mm | 950 | |||
| 拉杆内间距 Distance between tie-bars | mm | 1020x960 | |||
| 最小模具尺寸Min mould dimension | mm | 665x625 | |||
| 最小模厚 Max.mold height | mm | 980 | |||
| 最小模厚 Min.mold height | mm | 400 | |||
| 模板开距MAX.Dalylight | mm | 1930 | |||
| 顶出行程 Ejector stroke | mm | 280 | |||
| 顶出力 Ejector force | KN | 186 | |||
| 顶出数 No.of ejector pins | PCS | 16+1 | |||
| 其它 OTHERS | |||||
| 系统压力 System pressure | Mpa | 16 | |||
| 油泵排量 Hydraulic pump capacity | CC | 163+63 | |||
| 电马达功率 Drive mootor power | kw | 55+52 | |||
| 电热功率 Heator Power | kw | 54 | |||
| 加热段数 No.of heater zones | pcs | 5+1 | |||
| 外形尺寸Machine dimensions(LxWxH) | m | 11x2.3x2.7 | |||
| 理论机重 Machine weight | Tom | 35 | |||
| 邮箱容积 Oil tank capacity | L | 1150 | |||
| 模板正面尺寸图 Platen dimensions | |||||
| 模板侧面尺寸图 Mould space dimensions | |||||
