M-200橡胶塑料摩擦磨损试验机

（北京北广精仪仪器设备有限公司，所有设备保修两年，终身售后服务。）

橡胶塑料摩擦磨损试验机技术参数：

1、试样尺寸： 30mm×7mm×6mm
2、转动速度： 0-500转/分 （可调）
3、负 荷： 196N ± 0.1%（可增至392N）
4、摩擦环尺寸：￠40×10mm ，倒角0.5×45°，外圆表面与内圆同心度偏差小于0.01 
5、摩擦环材质：45号钢,淬火,热处理HRC40-45,外圆表面光洁度▼8
6、摩擦力矩： 0--4N·m 
7、砝码重量：4KG砝码一件，1KG砝码4件，可实现重量叠加功能。

精度：
1、速度精度：1%
2、负荷精度：0.5%
3、摩擦力矩精度：1%
4、计数器精度：1S
5、传感器测量精度：1% FS

符合标准：GB/ T3960-1983塑料滑动摩擦磨损试验方法 GB/T9141.8-1999柔性石墨板材滑动摩擦系数测试方法 适用于塑料制品、橡胶制品、石墨板材或其他复合材料的滑动摩擦，磨损性能测试，也可对试验中试样的磨擦力、磨擦系数和磨损量进行测定。 本仪器融合了当前的智能电路系统进行控制，并结合老式M-200摩擦磨损试验机的功能进行升级改造而成，本仪器具有测控精度高，操作便捷等优势，是科研院所、质检机构、实验室研究*的试验设备。 M-200型摩擦磨损试验机主要由试验主机及智能控制系统两大部分构成，通过微机控制系统进行操作试验，在试验过程中同时可以显示数值、扭矩、时间曲线，并可以随意设定试验次数，显示当前试验数值，设定时间及当前试验时间等多种功能，随机配备彩色打印机，可以打印出带有曲线、表格数据等标准要求的试验报告。

特点：
1、系统运行稳定，可靠性高。
2、结构紧凑，使用方便，简单。
3、采用高精度电机、驱动机、传感器，精度高。
4、具有试验人员分级管理功能。
5、实时显示摩擦系数-时间，扭矩-时间曲线。
6、试验报告可打印试验参数，试验数据，曲线，备注等信息，简单，方便，可编辑。

配置及附件：
1、试验主机一台
2、高精度扭矩传感器一只
3、计算机数据采集卡一块
4、计算机一台（品牌）
5、彩色激光喷墨打印机一台
6、计算机控制软件一套
7、4Kg 砝码两件（备用一套）
8、标准磨擦环四件（备用两件）
9、产品使用说明书一份
10、产品合格证
11、产品装箱单一份
12、整机重量：约87 公斤

Technical parameters:

1, the sample size: 30 mm x 7 mm x 6 mm

2, the rotation speed: 0-500 revolutions per minute (adjustable)

3, negative charge: 196 n + / - 0.1% (can be increased to 392 n)

4, friction ring size: 40 x 10 mm, ￠0.5 x 45 ° chamfer, cylindrical surface and inner circle concentricity deviation is less than 0.01

5, friction ring material: 45 # steel, quenching, heat treatment HRC40-45, cylindrical surface finish ▼ 8

6, the friction torque: 0-4 n. m

7, weight weight: 4 kg weight, 1 kg weight 4 pieces, superposition of weight function can be realized.

Accuracy:

1, speed accuracy: 1%

2, the accuracy of load: 0.5%

3, the friction torque accuracy: 1%

4, counters, precision: 1 s

5, sensor measurement accuracy: 1% FS

Conform to the standards: GB/T3960-1983 plastic sliding friction and wear test method of GB/T9141.8-1999 flexible graphite plates sliding friction coefficient test method is suitable for the plastic products, rubber products, graphite plates or other composites sliding friction, the wear performance test, can also be used to test the sample of friction, friction coefficient and wear volume was measured. The instrument combines the latest inligent control circuit system, and combined with the function of the old M - 200 friction and wear testing machine upgrading, this instrument has high control precision, the advantages of the operation is convenient, is a scientific research institutes, quality inspection institutions and laboratories research preferred test equipment. M - 200 type friction and wear testing machine is mainly composed of host and inligent control system of two parts, through the microcomputer control system operating experiment was carried out, in the process of test curve can display the numerical, torque and time at the same time, and are free to set the number of test, display the current test values, setting time and the test time and so on a variety of functions, random equipped with color printer, you can print out with curve, such as table data standard test report.

Features:

1, the system runs stably and high reliability.

2, compact structure, easy to use, simple.

3, motor, drive, sensor with high precision, high precision.

4, with functions of test personnel hierarchical management.

5, the friction coefficient in real time - time, torque - time curve.

6, test report can be printed test parameters, test data, curve, note the information such as, simple, convenient, and can be edited.

The main configuration and accessories:

1, test host

2, a high precision torque sensor

3, computer data acquisition card

4, a computer (brand)

5, color laser inkjet printer

6, a set of computer control software

7, 4 kg weight in two (a back-up)

8, standard friction ring four pieces (spare two)

A 9, product specification

10, product certification

11, the product packing list in duplicate

12, the weight: 87 kg