常州远见机械有限公司
常州远见机械有限公司
产品特点
1、利用逆流冷却原理对高温、高湿的颗粒进行冷却，避免了冷风与热料直接接触而产生骤冷现象，因而能防止颗粒产生表面开裂，同时，由于采用闭风器进料，且进风面积大，因此冷却；
2、采用滑阀往复式排料机构，运动平稳、可靠，残留小；
3、能耗低、操作简便；
4、冷却后成品温度不高于室温+3℃～5℃；
5、适用于颗粒物料的冷却。
主要技术及性能参数
型 号 参 数 | SKLN1.5 | SKLN2.5 | SKLN4 | SKLN6 | SKLN8 |
冷却容积(m³) | 1.5 | 2.5 | 4.0 | 6.0 | 8.0 |
生产能力(t/h) | 3 | 5 | 10 | 15 | 20 |
冷却时间(min) | 不少于10-15 | ||||
冷却后料温(℃) | 不高于室温+3~5 | ||||
吸风量(m³/min.t) | 34 | ||||
配用动力(kw) | 0.75 | 1.10 | 1.50 | 1.50 | 1.50 |
关风机动力(kw) | 0.55 | 0.55 | 0.55 | 0.75 | 0.75 |
SKLN Series Counterflow Cooler
SKLN 系列逆流式冷却器
Features
1. The counterflow cooling principle is adopted to cool the pellets with high temperature and moisture. Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack caused by sudden cooling produced by direct touching between cool air and hot pellets. At the same time, the airlock is used for feeding and space of air inlet bigger, therefore it can get better cooling effects;
2.Slide reciprocating discharger has smooth and reliable discharging, low residue;
3.Low power consumption, ease of operation;
4.Pellet temperature after cooling is less than +3°C～5°C ambient temperature;
5. Capable of cooling pellets.
Main Technical Parameters
Model Parameters | SKLN1.5 | SKLN2.5 | SKLN4 | SKLN6 | SKLN8 |
Volume(m³) | 1.5 | 2.5 | 4.0 | 6.0 | 8.0 |
Capacity(t/h) | 3 | 5 | 10 | 15 | 20 |
Cooling time(min) | Less than 10-15Mins | ||||
Temperature after Cooling(°C) | Not higher than ambient temperature +3~5 | ||||
Aspiration(m³/min.t) | 34 | ||||
Power(kw) | 0.75 | 1.10 | 1.50 | 1.50 | 1.50 |
Power of Airlock (kw) | 0.55 | 0.55 | 0.55 | 0.75 | 0.75 |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
包装印刷产业网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
