5000N伺服拉力机的英文说明

H o s t s p e c I f I c a t I o n s

1.  High-accuracy American Transcell force sensor:matching within 50KN.The force accuracy is within ±5%.

2.  Capacity segmentation:seven shifts in the entire travel:×1%,×2%,×5%,×10%,×20%,×50%and ×100%.The high-accuracy 24bits A／Dis adopted,and the sampling frequency is 200Hz.and Max.force resolution in the entire travel is 1／1000,00.

3.  Power system:Japan Panasonic AC servo motor＋Panasonic AC drive＋Germang Planetary reducer＋ball screw＋feed rod linear bearing＋synchron ous belt drive.

4.  Control system:the Pulse Command control mode is adopted to make the control more accurate,with the speed control range of0.001～1000mm／min.The intermediate plate adjustment has the functions of rapid rough adjustment and slow fine adjustment,After testing,automatically return to the original point and automatically save.

5.  Data transmission mode:RS232 transmission.

6.  Display mode:display in the screen of the computer with UTM107＋WIN-XP testing software.

7.  The force linear double calibration system with the simple one shift and the accurate sevenshifts in the entire travel.

8.  The luxury testing interface software can realize the control modes of speed setting,displdcement setting, load setting（can set holding time）,load incrase rate setting, stress increase rate setting,strain increase rate setting,etc,and together with the multi-level control mode,can meet various testing requirements.

9.  Testing space:the testing widthis about 350mm（standard specifications）and the link plate moving space is about900mm（not including jigs）9standard specifications）

10. Entire-travel displacement: the encoder is 2500P／R,the LINE DRIVE encoder is adopted to increase 4times accuracy with extremely strong capacity of resisting disturbance,and the displacement resolution is 0.001mm.small deformation:metal extensometer,and the resolution is 0.001mm（optional）.

11. Safety devices:overload emergency shut-down device, up and down travel limiting device, electric leakage auto-power-off system, and automatic breakpoint halt function.

12 .Manual control mode:wireless remote control device or manual control case can be added

I n t r o d u c t I o n   o f  s o f t w a r e   f u n c t I o n s

1.  Testing standard modularization function:to provide user-set necessary application testing and standard settings,and the range covers GB,ASTM ,JIS,BS,etc.The testing standard specifications.

2.  Testing objects information:to provide all the user –set testing objects data,and one-time input the data for permanent repeated using.You can add ormodify formula by yourself to raise the propriety of the testing data.

3.  Double reports edition:full open user-editing report for the testers to se lect the favorabie report form （the testing program newly adds the internally built EXCEL report editing function to extend the form of the report,whichis formerly singular）

4.  Each length,force unit,display digit adopts dynamic exchanging mode force unit T, KG,N,KN,gand lb and deformation unit mm,cm and inch.

5.  Automatic optimization of graphic curve scale（Auto Scale）can make the graph display in optimal scale,and make the reak-time graph dynamic switchin the test with loaddisplacement,load-time,strese-strain,load-2-point extension chart,and multi-curve comparison.

6.  The testing results can be output in data in EXCEL form.

7.  After the testing,automatically and manually save the files,and calculate Max,force.up,and down yield strength,lagging ring method,step-by-step      method,non-proportion extending strength,tensile strength,pressive strength,random point set elongation  strength, random point set load extension,elasticity modulus,extension tate,stripping interval Max.value,Min.value,average value,net energy,turn-back energy,total energy,bending modulus,breakpoint displacement x℅load,breakpoint load x℅,displacement,etc. Data backup:the testing data can be saved in required hard disc partition.

8.Multiple languages can be randomly switched:simplified Chinese,tradi tional Chinese,and English.

9.The software has the function of the history testing data demonstation.

A T T a C H M E N T S

1.One-year quality guarantee and Chinese operating instruction

2.One-group of standard tension jigs given with the machine （other jigs to bepurchased）

3.One piece of testing software specialized for the tensile machine

4.One brand computer and one color printer

M A I N T E C H N I C A L I N D E X

1.Load cell:optional within 50KN

2.Force resolution:1／100000

3.Force accuracy:≤0.5﹪

4.Force magnification times:automatic switching of 7 shifts

5.Displacement resolution: 1／100000

6.Displacement accuracy: ≤0.5﹪

7.Metal extensometer resolution: 1／100000

8.Metal extensometer accuracy: ≤0.5﹪

9.Large deformation extensometer accuracy:±1mm

10.Speed range:0.001-1000m／min（special testing speed can be made according to customer′s need）

11.Movement space:900mm（special testing width can be made according to customer′s need）

12.Testing width:400mm（special testing width can be made accordinf to customer′need0

13.Applying power source:￠220v 50HZ

14.p[OWER:ABOUT 1.5kw

15.Machine dimensions:about 640×720×2000mm（length×width×height）

16.Machine weight:about 280kg

 Experimental Jiangdu days Hui Machinery Co., Ltd. :0514 -8,678,861,2   86,788,613    :0514 -86,588,229