MS-B系列全电脑印刷开槽模切机

用途与特点：

*吸附前缘送纸系统，操作简单，精度高。

安装7英寸真彩触摸屏，可以预置200组订单、订单查询、零位订单输入、整机同步归零、相位自动/手动调整、机器参数管理、抬落版匀墨手动/自动控制、自动显示生产数量和生产速度以及设置生产数量。

所有传动辊材质均为优质钢，镀硬铬，表面研磨。传动齿轮采用优质合金钢，经热处理，研磨而成间隙调整采用高精度蜗轮箱自锁调整、并配有三杆圆盘手柄座，方便快捷。

开槽部采用电动控制调整各刀座轴向、纵向和箱高尺寸。

模切速差补偿系统，凸轮式软辊横向游动40mm，脚垫磨损均匀，提高胶垫利用率，降低使用成本。

应用于3 /5 / 7层瓦楞以及E楞纸板。

送纸部

PAPER DEPARTMENT

1.*前缘送纸统，操作简单，精度高；

2.7.5kw高压离心风机，可以根据纸板翘曲程度调整风量，确保纸板顺利进入；

3.左右挡板位置由丝杠带动电动调整，右挡板附气动拍齐装置；

4.隔张送纸功能，可根据需要选择隔张送纸，保证较大规格纸板也能加工；

5.安装7英寸真彩触摸屏，可以预置200组订单、订单查询、零位，订单输入、整机同步归零、相位自动/手动调整、机器参数管理、抬落版匀墨手动/自动控制、自动显示生产数量和生产速度以及设置生产数量；

6.与开槽部装有联锁控制开关，实现急停，停送或复位送纸，正反转动，各机组的相们点动，傻呵呵作人性化；

7.后托纸架电动控制前后，加速设置速度；

8.采用毛刷擦尘装置，并配有强力负压吸尘风机，清除纸板表面的灰尘、纸屑等杂物，提高印刷质量。

1.advanced front feeding system, simple operation, high precision

2.7.5 kw high pressure centrifugal fan, can adjust the air volume, according to the cardboard warping degree to ensure smooth into cardboard About 

3.baffle position by lead screw drive electric adjustment, or baffle pneumatic film device

4.every piece of paper, can choose according to need every piece of paper and cardboard of large size also can process

5.ａnd 7 "true color touch screen installation, 200 groups can be preset orders, inquiries orders, zero. The order entry, the machine synchronous zero, phase automatic/manual adjustment

machine parameters management, lift fall edition distributing manual/automatic control, automatic display production quantity and production speed and set production quantity

6.with slot department is equipped with interlocking control switch, stop, stop sending or reset to send paper, positive and negative rotation, each unit of phase points, humanized

operation

7.after the paper holder frame before, during and after the electric control speed setting speed

8.use brush to wipe the dust device, and is equipped with a powerful negative pressure suction fan, remove dust on the surface of the cardboard, paper scraps and other sundry, improve

the quality of printing

印刷部

PRINTING DEPARTMENT

1.优质钢制作、表面磨削、镀硬铬。静平衡校正，运转平稳，适应高速动转；

2.辊身水平方向和圆周方向刻制基准线，方便对版；

3.棘轮固定式卷版轴挂版、设有左右两边锁紧装置，让挂版对位更快捷准确；

4.安装脚踏开关控制装版滚筒正反转，方便换版；

5.间隙调整采用高精度蜗轮箱自锁调整、并配有三杆圆盘手柄座，方便快捷。调整范围0-11mm；

6.采用优质无缝钢管精致加工，钢管表面研磨、镀硬铬，动平衡校正；

7.印刷相位采用PLC触摸屏控置及电动数字式360度调整（运转、停止均可调整）；

自动归零装置，以保证机组有统一的调整基和空转装置，送纸时网纹辊下降与印版接触，这停止送纸时网纹辊自动上升与印版分离，以保护印版；不印刷时自动空转，防止油墨干涸。

1.the production of high quality steel, surface grinding, hard chromium plating. Static balance adjustment, stable running and adapt to the high-speed operation.

2.roll horizontal direction and circumferential direction henceforth have its official line, convenient to version.

3.ratchet fixed volume axis version, the left and right sides lock device, make hanging version registration more fast and accurate.

4.install the foot switch control plate drum positive &negative, convenient change version.

5.clearance adjustment self-locking worm gear box with high precision, and is equipped with three stem disc handle, convenient and quick.Adjusting range 0 to 11 mm.

6.delicate high quality seamless steel tube processing, steel pipe surface grinding and hard chromium plating, dynamic balancing correction.

7.printing phase PLC touch screen control and electric digital 360“adjusted (motion and stop all can be adjusted).

8.automatic zero device, to ensure that the unit has a unified adjust benchmark, testing-run a commonly can adjust the correct position, reducing waste of cardboard.

9.pressure type and automatic lifting gear roller, and idle device, feeding anilox roll down when in contact with the plate, stop feeding anilox roll automatically rise and plate separation, in order to protect the plate; Don't press automatic idling, prevent the ink dries up.

开槽部

SLOT DEPARTMENT

1.采用电动控制调整各刀座轴向、纵向和箱高尺寸；

2.间隙调整采用高精度蜗轮箱自锁调整、配有三杆圆盘手柄座，方便快捷，调整范围0-11mm；

3.行星式齿轮构造，适用寿命长；

4.开槽相位采用PLC触摸屏控置及电动数式360度调整（运转、停止均可调整），相位归零装置；

5.单轴双刀开槽，箱高调整采用内齿电调结构，使润滑油不容易污染纸箱。并且箱高调整有防碰撞保护装置，不会损坏机器；

6.采用*的弹屑式除尘装置，操作方便。

1.adjusted by electric control knife axis, vertical and cases of high dimensions

2.clearance adjustment adopts high precision self-locking worm gear box, equipped with three stem disc handle, convenient and quick. Adjust the range of 0-11 mm

3.planetary gear structure, long service life

4.slotting phase PLC touch screen control and electric digital 360 0 adjusted (motion and stop all can be adjusted). Phase zero device

5.double slot, single axis, high box to adjust the Internal tooth electrical structure, make the lubricating oil is not easy to pollution of the cartons. And high adjusting box collision protection, not damage the machine

6.adopt unique play chip type dust removal device, easy to operate

模切部

DIE CUTTING DEPARTMENT

1.软辊切削机构提高胶套重复使用率；

2.线速度自动补偿确保每批纸箱的模切尺寸*一致；

3.凸轮式软辊横向游动40mm，脚垫磨损均匀，提高脚垫利用率，降低使用成本。模切相位采用电动

4.数字式360度调整（运转、停止均可调整）；

5.送纸轴，抛光研磨、镀硬铬，配有四个滚轮送纸；

6.送纸辊齿轮采用无侧隙调节机构，调整时不影响齿轮咬合，保证传动精度；

7.间隙调整采用高精度蜗轮箱自锁调整，方便快捷。调整范围0-11mm。

1.soft roll cutting mechanism to improve slab repeat usageo

2.linear speed automatic compensation to ensure that each batch of carton die-cutting size exactly.

3.the CAM type soft roller transverse moving 40 mm, MATS wear uniform, improve the utilization rate of foot pads to reduce the cost. Die-cutting phase adopts electric 4,

4.360 0 digital adjustment (motion and stop all can be adjusted).

5.paper feed axis, polishing, plating hard chromium, equipped with four wheel feed.

6.the feed roller gear are no clearance regulating mechanism, adjustment does not affect the gear wheels, guarantee the transmission accuracy.

7.clearance adjustment self-locking worm gear box with high precision, convenient and quick. Adjusting range 0 to 11 mm.