MS-A系列全电脑印刷开槽模切机

用途与特点:

整台机器是按照高要求、高标准及可靠性、安全性而设计制造。

各机台采用PLC单独控制，彩色触摸显示屏，各种参数设定和显示直观明了。

全部电器、电子及气动零件都采用产品。

选用优质、高标准的材料和配件。

所有主传动齿采用特殊进口材料，经高精度研磨，经久耐用，齿轮润滑采用油泵喷淋系统。

自动归零、复位。

可储存常用订单，加快换单操作。

应用免键轴环，保持长期使用效果和高的印刷套准精度。

USES AND FEATURES

The whole machine is designed and manufactured in accordance with the requirements, high standards and high reliability, safety and.

The machine adopts PLC control alone, color touch screen display, parameter setting and display intuitive.

All the electrical appliances, electronic and pneumatic components adopt international famous brａnd products.

The selection of high quality, high standard materials and accessories.

All the main drive gear with special imported materials, with high precision grinding, durable, gear lubrication adopts oil pump spray system

Auto zero reset.

You can store different orders, speed up the order operation.

The key free collar, long-term effect and high printing precision.

送纸部

PAPER DEPARTMENT

1.采用叁轴（四轴），前缘滚轮送纸，送纸更准确，薄而弯曲纸板容易送入；

2.可设置纸板送程，减小拉纸辊咬送压力；

3.可连续、隔张或单张送纸，机器计数器准确记录生产数量；

4.以纸板前缘为基准，减少机械误差，使印刷、开槽位置更准确；

5.采用变频控制风量及压力，以适应纸板的厚薄和大小；

6.采用触摸习设定调整侧挡板间隙大小，调整快捷；

7.高效吸屑除尘机可大量消除纸板印刷表面上的杂质，提高印刷品质；

8.后托纸台采用气、电控制前后移动，调整迅速；

9.附有强力气缸整机主锁，使机器运转更平稳；

10.主机马达启动保护装置---机器未锁紧到位时，主机无法开机运转。

1.Adopting three axes (four axis), leading edge roller to send paper, p即er feeding is more accurate, and the bending board is easy to be fed;

2.Can be set to send the board to reduce the pressure of paper roll;

3.Can be continuous, separate sheets or sheet fed, machine counter to record the number of production;

4.The leading edge of the cardboard to reduce the mechanical error, so that printing, slotting position is more accurate;

5.Using variable frequency control of air volume and pressure, in order to adapt to the board thickness and size

6.Touch screen is used to adjust the clearance of the side baffle;

7.High efficiency dust removal and dust removal machine can eliminate the impurities on the surface of cardboard printing, and improve the printing quality

8.After the use of gas, electric control, before and after the move, adjust quickly;

9.With a strong cylinder main lock, so that the machine running more smoothly;

10.Host motor start protection device一the machine is not locked in place, the host can not boot operation

印刷部

PRINTING DEPARTMENT

1.采用挂板印刷系统，换版操作方便，并设有脚踏开关，方便挂板；

2.网纹辊配梧送纸系统气压式自动升降装置，（送纸时网纹辊下降与印版接触，停止送纸时网纹辊上升与印版分离）；

3.印刷滚筒周向调整机构采用行星式齿轮制造；

4.印刷相位采用触摸屏控制及电动数字式360度调整（运转、停止状态下均可调整）；

5.着墨辊采用高精度硬铬耐磨网纹辊；可选配陶瓷网纹辊；

6.橡胶辊采用钢管表面包裹耐磨橡胶，经中高特殊研磨，传墨效果好，（依客户需要选配密封刮刀系统）；

7.印刷相位固定装置采用电磁离合器制动式刹车机构，当机台分离式调整相位时，刹车机构限制机台转动，保持原有齿轮位置固定点；

8.控制面板装有触摸屏，操作方便。

1.the hanging plate printing system is adopted, and the exchange plate is convenient to operate, and a foot switch is arranged

2.roller with paper feeding system pressure type automatic lifting device. (feed roller and a printing plate contact down, stop Stop feeding roller and a printing plate separation) rise.

3.printing roller circumferential adjustment mechanism using planetary gear manufacturing.

4.printing phase using touch screen control and electric digital 360 degree adjustment (operation, stop state can be adjusted)

5.inking roller adopts high precision hard chromium roller; optional ceramic roller.

6.rubber roller with steel tube surface coated with wear-resistant rubber, the middle and high special grinding, ink effect is good. According to customer needsSeal scraper system to be selected

7.the printing phase fixing device adopts an electromagnetic clutch brake mechanism The rotation of the machine is limited, and the fxed point of the original gear position is maintained

8.control panel is equipped with touch screen, easy to operate.

开槽部

SLOT DEPARTMENT

1.压线轮、开槽刀盘轴位置调整，设有触摸屏预计设定数据和手动调整两种方式，调整快捷准确，生产过程中可预置下一批订单尺寸。

2.压线轮、送纸轮开槽刀座轴向移动，采用双丝杆导向移动平稳，定位准确；

3.开槽相位采用伺服电机、触摸屏控制及电动数字360度调整（运转、停止状态下均可调整），并有复位功能，并可储存订单；

4.控制面板装有触摸屏，可控制送纸部、印刷问、开槽部，操作方便；

5.中刀移动，可生产大型两版式纸箱。（选用配置）

6.刀轴送纸轴均经镀硬铬精磨，寿命长，移动时不发生颤动；

7.如用户需要可配打孔装置。

1.pressing wheels and slotting cutter axial position adjustment, a touch screen and manually adjust the preset data in two ways Adjust quickly and accurately, the production process can be preset to the next batch of order size

2.wire wheels, wheel slot knife axial movement by double wire rod guide move smooth, accurate positioning

3.slotted phase using servo motor, touch screen control and electric digital 360 degree adjustment Can be adjusted'), and has a reset function; and can store orders The 

4.control panel is provided with a touch screen, which can control the feeding part, the printing part and the slot part, and the operation is convenient

5.in the knife to move, can produce large two piece carton. (selection of configuration)

6.the paper feed shaft of the cutter shaft is plated with hard chrome finish, long life and no vibration when moving

7.if the user needs to be equipped with a drilling device

模切部

DIE CUTTING DEPARTMENT

1.胶辊采用可拆式优力胶垫设计，拆装容易，便于更换；

2.胶辊轴向40mm左右来回移动采用液压控制，每转游动量可调整，移动平稳可靠；

3.模切相位采用变频器、触摸屏控制及电动数字式360度调整，可储存定单；

4.电动数字式调整刀模横向位置装置，调整距离左右共16mm；

5.采用PLC、触摸屏控制刀模辊和胶辊间隙；

6.胶垫辊补偿采用伺服独立马达驱动，普通纸箱补偿围±3mm；

7.胶辊和刀模辊芯均用优质钢制造，表面镀硬铬抛光，并经平衡校正，增加运转稳定性。

1.rollers with removable rubber pad design, easy disassembly, easy replacement.

2.rollers axial back and forth about 40mm movement with hydraulic control, each turn moving adjustable, stable and reliable

3.die cutting phase inverter, touch screen control and electric digital 360 degree adjustment, can store orders.

4.electric digital adjustment tool transverse position device, adjust the distance of a total of 16mm.

5.controlled by PLC and touch screen cuYYer roller and the rubber roller gap

6.the roll compensation of the rubber pad is driven by the servo motor, and the compensation range of the ordinary cardboard box is+3m m.

7.rollers and a knife mold roll core is made of high-quality steel, hard chromium plating and polishing surface, balance correction, increase the running stability.