名称：带斗门座式起重机（KANGAROO PORTAL CRANE）
带斗门座式起重机（KNGGAROO PORTAL CRANE）
带斗门座式起重机是一般常规码头的卸船专用设备，通过抓斗抓取物料，提升到卸料斗上方卸料，然后通过机上皮带机将物料输送到地面输送系统。适用装卸物料为煤炭、黄沙和谷物等。电器部分采用变频调速、PLC程序控制，运转平稳，安全可靠。
The kangaroo portal crane is a specially-used equipment in general ordinary wharf. It captures the material through the grab, dismounts the material above the grab and then passes the material to the ground expulsion system through the belt. It’s suitable for the handling material, the coal, sａnd and grain so on. The electric appliance partially uses the frequency control, the PLC program control, and the revolution is steady, safe and reliable.
主要技术参数MAIN TECHNICAL PARAMETERS
项 目 ITEM | 单位UNIT | DMQ320 | DMQ540 | DMQ650 | |
额定生产率 Rated capacity | t/h | 320 | 540 | 650 | |
装卸物料 Handling materials | 煤炭、黄沙、谷物Coal, Sand, Grain | ||||
物料容量 Bulk capacity | t/m³ | 0.8~2.5 | |||
额定起重量 Lifting capacity | t | 10 | 16 | 32 | |
工作 幅度 Working radius | Max. | m | 30 | 32 | 32 |
最小 Min. | m | 8.5 | 9.5 | 9.5 | |
起升 高度 Hoisting height | 轨面上Above rail | m | 18 | 20 | 20 |
轨面下Below rail | m | 15 | 15 | 15 | |
轨距×基距 Rail span×Base span | m | 10.5×10.5 | 10.5×10.5 | 10.5×10.5 | |
说明：以上参数仅供参考，可根据用户需求进行设计、制造。
Notes: The parameters given in the table are the conventional type for reference only. We can also design and manufacture products according to customer’s requirement.
