TOB-高速水墨印刷开槽模切机

TOB-高速水墨印刷开槽模切机

 TOB-高速水墨印刷开槽模切机

 整机性能：
该产品能一次性完成纸板的多色印刷、分切、压线、修边、开槽、切角、模切、打孔等多道工序。采用前缘吸附式送纸，风量可调，主机变频控制。PLC电脑相位电动调整，各连接部气动锁紧，电动分离，齿轮40cr材质高频淬火，精磨齿轮，齿轮润滑采用喷淋式循环润滑齿轮也轴免键结构连接，该机具有套色准确，印刷图案精美，使用和维修方便，自动化程度高、高效率生产隔张送纸等特点。
The performance of:This product can complete color printing, cardboard cutting, creasing, trimming, slotting, corner cutting, cutting, punching and other processes. The leading edge of adsorption type paper feeding, adjustable air volume, host frequency control. PLC computer phase electric adjustment, each connecting pneumatic locking, electric separation, gear made of 40Cr high frequency quenching, grinding gear, gear lubrication by spraying circulation lubrication of the gear shaft is key free connecting structure, the machine has the printing color accurately, exquisite design, convenient use and repair, high degree of automation, high efficiency production characteristics Zhang feed.

送纸部
 整机性能：
前缘式送纸方式，可根据纸板弯曲程度调整风量，确保送纸顺畅。
主机马达启动保护装置，机台未固定时，主机无法启动。
可连续或隔张送纸。
双进纸橡胶辊，橡胶辊有防超压沟槽，减少压扁送入的纸板。
隙小而破坏进入纸板的强度。
左右挡板位置电动数字式控制。（可加气动自动排齐）后挡箱电动调整，前挡板间隙手动同步调整。
除尘装置，除尘毛刷和吸尘风机可清除纸板表面灰尘。可按纸板尺寸分段调整除尘风口。电动控制机台离合并附警铃，确保操作人员安全。
电子计数可设定生产量，到达设定产量自动报警。（如选择触摸屏控制，可直接于触摸屏显示生产量）。
Feeding unitThe performance of:The front feeding way, according to the curvature of the board to adjust the air volume, ensure smooth feeding.The main motor starting protection device, the machine is not fixed, the host can not start.Continuous or Zhang feed.Double feed rubber roller, rubber roller, anti overpressure groove, reduce compressed into cardboard.Gap small break into cardboard intensity.The side baffles digital electric control. (automatic filling can be aligned) after retaining box electric adjustment, front baffle manually adjusted clearance.Dust removing device, dust brush and vacuum blower can remove the dust on the surface of the board. Can be adjusted according to the size of cardboard dust outlet section. Electric machine control from the merger of the alarm, to ensure the safety of operating personnel.The electronic counter can set production, to set alarm output. (such as touch screen control, can be directly on the touch screen display production).

印刷部
整机性能
印刷辊采用无缝钢管，表面研磨，镀硬铬，平衡校正，运转平稳。
快速换版装置，装卸印版时，脚踏开关电动控制版辊的正反向转。
送纸辊，压印辊，胶辊，网纹辊间隙调整均采用自锁结构。
印刷辊相位调整均采用PLC以及电动数字输入式360℃调整，停机及运转时均可调整。印刷辊横向调整采用PLC及电动数字式调整，调整范围±10mm.
印刷相位固定装置气动式刹车机构，当单元分离调整或清晰时，刹车机构限制齿轮转动，保持原有齿轮位置固定点。
网纹辊采用配合送纸系统气压式升降装置（送纸式网纹辊按单元顺序自动落下，停止送纸时按单元顺序自动抬起）。
气动隔膜泵上墨，自动循环，加上清洗。
擦板记忆功能，清洗印版后可回到原印刷位置。
The performance ofThe printing roller made of seamless steel pipe, surface grinding, hard chromium plating, balance correction, stable operation.Quick change device, loading plate, forward and reverse pedal switch electric control roll.The paper feeding roller, embossing roller, rubber roller, roller gap adjustment adopt self-locking structure.The printing roller phase adjustment by PLC and electric digital input 360 degrees adjustment, can be adjusted and can stop the operation. The printing roller horizontal adjustment by PLC and digital electric adjustment, the adjustment range of 10mm..The printing device fixed phase pneumatic brake mechanism, when the separation unit to adjust or clear, brake mechanism limits the gear rotation, keep the original location of the gears.The roller feeding system with pneumatic lifting device (feed roller type according to the unit in order to automatically fall, stop feeder in unit order auto lift).Pneumatic diaphragm pump inking, automatic circulation, and cleaning.Erasing memory function, after cleaning plates can return to the original printing position.

开槽部
整机性能
预压轮，经预压线后的纸板不易破裂。
单轴双刀开槽，箱高调整采用PLC及数字式电动调整。（也可选用PLC及触摸屏调整）
开槽相位采用PLC及电动数字输入式360℃调整，停机已运行均可调整。（也可选用PLC及触摸屏调整）
开槽刀座及压线轮横向移动采用同步电动调整。（也可选用PLC触摸屏调整，直接输入纸箱尺寸，自动调整）
压痕间隙及刀轴间隙调整采用自锁结构。
开槽刀箱高调整有防碰撞保护装置，不会损坏机器。
各开槽刀座横移有防碰撞保护装置。（电子式）
开槽刀宽度7mm,合金材质，经热处理，研磨、齿形开槽刀，双片式修边刀，刀口锋利，精度高。可配手提打孔模座。
Slot  The performance of  The pre pressing wheel, after pre pressing board is not easy to break.Single shaft and double slotted knife, the height of the carton adopt PLC and digital electric adjustment. (can also use PLC and touch screen adjustment)Slot phase PLC and electric digital input 360 degrees adjustment, stop running can be adjusted. (can also use PLC and touch screen adjustment)The slotting knives and pressing wheels moving laterally by synchronous electric adjustment. (can also use the PLC touch screen adjustment, direct input box size, automatic adjustment)Indentation knife shaft clearance and clearance adjustment adopt self-locking structure.Slotting knife box high adjust the anti collision protection device, will not damage the machine.Theslotting knives traversing an anticollision device. (Electronic)Slotting knife width 7mm, alloy material, after heat treatment, grinding, tooth slotting cutter, double disc grinding blade, sharp edge, high precision. Can be equipped with portable punch die seat.