TM3000E/TM2480E 底加温真空覆膜机
特征
本机工作台为手动运行，加温仓固定不动，可减少热量损耗，电器故障。
真空控制使用电接点真空表，自动控制真空气压。微电脑温度控制仪，自动搜索温度变化速度，从而调整加热速度，以达到精确控制温度的目的。
本机采用国内直联真空泵，噪音小，抽气速度快。
Features：
The working table of this machine is operated manually and the warming warehouse is fixed, which can reduce heat loss and electrical failure.
Vacuum control uses electric contact vacuum meter to automatically control vacuum pressure. Microcomputer temperature controller automatically searches for the speed of temperature change, so as to adjust the heating speed, in order to achieve the purpose of precise temperature control.
This machine adopts the domestic top direct vacuum pump, with low noise and high pumping speed.
适用范围：
可将各种PVC膜贴覆于家具、橱柜、音响、工艺门、装饰墙裙板等各种板式家具上，并可在家装硅胶板后用于热转印膜和单面木皮的贴覆工作。
Scope of application:
All kinds of PVC film can be applied to furniture, cabinets, audio, craft doors, decorative wall skirt panels and other board furniture. It can also be used for thermal transfer film and single-sided veneer lamination after installing silica gel board at home.
技术参数 TM3000E/TM2480E 底加温真空覆膜机
外形尺寸 8800/5800/1500/1400mm
工作台尺寸 2550/1150/1300mm（内径innersize）
加工高度 50mm
额定工作压力 负压≥-0.095Mpa
总功率 15KW
实际耗电 约5KW
整机重量 约1.8T
