产品介绍packing machine
该机伺服电机驱动，冲裁频率8O-200次分钟、360万粒/班，(5板/次、10粒/板:150次/分钟、
8小时/班) :高产、低耗为您节省投资，降低运行(包装)成本。
2.外形美观，全部不锈钢蒙面，全封闭，符合制药行业GMP生产要求，质量可靠，运行稳定，
可按不同生产规模进行选型。
1.This machine is driven by servo motor, blanking frequency 80-200 times per minute,
3.6 million grainsper shift (5 boards per time,10 grains per plate: 150 times per minute,
8 hours per shift) : high production and low consumption can save the cost of your
investment and reduce the cost of operation (packaging).
2.With its beautiful appearance, all stainless steel masked, completely closed, conform
to the pharmaceutical industry GMP production requirements, reliable quality, stable
operation, can be selected according to different production scale.
包装范围packing contains
医药、食品、化妆品等行业的胶囊、片剂的包装。
pharmaceutical, food, cosmetics and other industries capsule, tablet packaging.
产品特点packing machine
板式正压吹塑成型,辊式热封，包装效率高，外形美观;
2.可与通用上料机、掉头上料机、圆盘振动上料机配套使用;
3.人机界面，PLC控制，无级变频调速，伺服电机驱动，高速范围冲裁80-200次/分钟，(冲切）﹔
注:根据板型长度，决定冲切次数;
4.视觉检测:采用国际品牌，检测精度高;
5.报警:无料报警、门禁报警、温度报警、气压报警、循环水报警;
6.加热方式:内热式加热，自动控温;
7.具有长充填平台，可提高成品率，可加装传送带;
8.冷却方式:循环水或自来水(外接);
9.冲切无废料，节省包材10%。
1. Plate type positive pressure blow molding, roller type heat seal, high packaging efficiency,
beautiful appearance;
2. lt can be used together with general feeding machine, reverse feeding machine and disc
vibrating feeding machine;
3.Human-machine interface,PLC control frequency conversion speed regulation, servo motor
drive, high speed range blankng 80-200 times/min,(blanking); Note: According to the length of
the plate, determine the number of punching;
4.Visual detection: using international famous brand, with high detection accuracy;
5. Alarm: no material alarm, access control alarm, temperature alarm, air pressure alam, water
circulating alarm;
6.Heating mode: internal heating, automatic temperature control;
7. lt has a long filling platform, which can improve the yield rate and can be equipped with
conveyor belt;
8.Cooling method: circulating water or tap water(external connection);
9.No waste material for washing and cutting, which can save 10% of wrapping material.
