整机性能特点
整台机器是按照要求，可靠性功能及安全性而设计制造。
选用优质材料及配件，所有传动辊材质均为优质钢，镀硬铬、表面研磨。
采用进口传动齿轮，传动齿轮加硬研磨而成，洛氏硬度＞60度。
采用免键连接环，减少中心磨损虚位放大，保持长期印刷套准。
自动归零。自动复位。
机油自动平衡装置，保持各个单元机油同一水平。
独立电脑控制台，可储存常用订单、换单快捷，操作方便。
整机各单元自动独立分离，操作方便，行走时持续响铃警示，确保操作人员安全。
传送辊、压印辊、网纹辊的间隙采用电动控制调整。
纸尘式收集系统。
General features
The whole machine is designed and made according to high requiements with reliable and safety
function order changing and user friendly operation.
Select excellent materials and parts,all rollers are made of the fine steel,with chrome plating and harden treatment.
Driving gears are imported products,its Rockwell hardness is above 60 degrees.
Adopted joint ring-free technology,to reduce abrasion and achieve precise printing result.
With automatic zero setting and function.
Adopted Gear lubricant auto self-balance device,to keep the lubricant levels in each unit uniform at all times.
Independent computer control is able to store different orderes,enable quick order changing.
Each working unit is motoaized for open and close actions,with waming alarm system to ensure safely.
The distance adjustment of the feeding roll,prees roll,ａnd netted roll are achieved by electro control.
Centrel collection system for the dust waste flakes.
进纸部
送纸部功能
前缘式送纸方式，可根据纸板弯曲程度调整风量，确保送纸顺畅。
主机马达启动保护装置，机台未固定时，减少压扁送入的纸板。
可连续或隔张送纸。
双进纸橡胶辊，橡胶辊有防超压沟槽，减少压扁送入的纸板。
前进纸橡胶辊铺气缸缓压装置，进纸准确、可靠，不会因进纸间隙小而破坏进入纸板的强度。
左右挡板位置电动数字式控制。（可加气动自动拍齐）后档箱电动调整，前档版间隙手动同步调整。
除尘装置，除尘毛刷和吸尘风机可清除纸板表面灰尘。 可按纸板尺寸分段调整除尘风口。
电动控制机台离合并附警铃，确保操作人员安全。
电子计数可设定生产量，到达设定产量自动报警。（可直接触摸屏显示生产量。）
Function of Feeding Department：
Adopt sun feeder,Wind absorbing auxiliary paperboard feeding,can make the cardboard feed favoringly. The volume of the wind can be adjusted acord the camber of the paperboard.
Start protecting device of the main motor,when the machine-platform not been locked, the main motor can not running.
Continuous and skip cardboard feeding,counting device is install.
Double rubber rollers for feeding,the rubber roller have slot for preven the overlarge pressure.
The feeding roller is rubber with cylinder cushioning device,precise feeding,will not destroy the hardness of the cardboard when feeding space is small.
The side baffles adopt electrical control with data display.(here can add automatic pneumatic aligning device),the back baffle box adopt electrical adjustment,the front baffles space is synchronous manual adjustment.
Brush dust-removal equipment with dust-absorption blower.Can adjust the wind volume accord the cardbard size.
Each unit is electriv moving left and right with warming bell.make sure the operator safe.
Electronic counter be used for setup for setup the production quantity,when complete the production quantity,automatic warning,(if chose the touch screen cintrol,the touch screen will display the production quatity.)
印刷部
印刷部功能：
印刷辊采用无缝钢管，表面 研磨，镀硬铬，平衡校正，运转平稳。
快速换版装置，装卸印版时，脚踏开关电动控制版辊的正反向转。
送纸辊，压印辊，胶辊，网纹辊间隙调整均采用自锁结构。
印刷辊相位调整均采用PLC以及电动数字输入式360度调整，停机及运转时均可调整。
印刷辊横向调整采用PLC及电动数字式调整，调整范围±10mm。
印刷相位固定装置，气动式刹车机构，当单元分离调整或清洗时，刹车机构限制齿轮转动，保持原有齿轮位置固定点。
网纹辊采用配合送纸系统气压式升降装置（送纸时网纹辊按单元顺序自动落下，停止送纸时按单元顺序自动抬起。）
气动隔膜泵上墨，自动循环，加水清洗。
擦板记忆功能，清洗印版后可回到原印刷位置。
Function of printing Department：
The printing roller adopt without gap roller,surface is treated by lapping finish,after balance aorrect and hard chrome plating,smooth in operation.
Quickly change printing plate device,foot switch for electric control control the printing roller's clockwise and anticlockwise running.
The feed roller,press roller,rubber roller and anilox roller space adjustment all adopt self-locking structure.
The phase of the printing roller adopt PLC and electric 360° adjust the error to input the sdjust data,can be adjusted while the machine running or stop.
The horizontal direction movinh of the printing roller adopt PLC and electric adjustment,accord the error to input the adjust data.the adjust scope is ±10mm.
The phase fix device adopt cylinder brake,when the unit is opened and washing,the cylinder brake device will brake all the units rolling running and keep the original location of the gears.
The autmatic Pneumatic control UP and down device of the anilox roller is synchronous with cardboard feeding system.(when the cardboard is fed,the anilox roller of esch peinting unit will automatic orderly go down. when stop feeding,the anilox roller will automatic orderly go up. )
Pneumatic membrane pump inking,automaticc circle,water washing.
With "clean printing plate memory"function,after washing the printing plate,the printing roller will running back to the original printing position.
干燥机
干燥部功能：
干燥部可选择热风，红外线UV干燥系统（选购）。
Function of Dryer Unit：
Hot air,dryer,infrared dryer or UVcoating dryer system as the optional can be installed in dwell unit.
模切部
模切部功能：
胶垫辊机械螺旋式横向移动，移动距离为40mm。
模切辊相位采用PLC及电动数字式360°调整，停机及运转情况下均可调整。（也可选用PLC及触摸屏调整）
模切辊与模切辊间隙调整采用自锁结构，并配有气缸大范围快速调整，减少胶垫损坏，增加胶垫使用寿命。
送纸辊间隙调整采用自锁结构。
速度补偿装置，可使优力胶辊随模板辊滑动，从而使胶垫辊的表面速度由力模控制，使模切的纸箱与刀模形状一致。
机器配有优力胶修正装置，可对优力胶反复多次修整后使用。
Function of Slotting Deparment：
The rubber roller adopt mechanical control the position move left and right. The movement distance is 40mm.
The phase of the die-cutting unit adopt PLC and electic 360° adiust,accord the error to input the adjust data,can be adjust while the running or stop.(PLC with touch screen adjustment as an option)
The horizontal moving of the die roller adopt PLC and electric adjustment,input the data accord the error,adjusting distance is 10mm.(PLC with touch screen adjustment as an option)
The space adjustment between rubber roller and roller adopt self-locking struchure,with cylinder big scope quickly adjust,decrease the rubber wear,increase the rubber life.
The unique speed compensation device can make the rubber roller rolling running with the die roller,make the surface speed of the rubber cushion is completely controlled by the die roller,the shape of the carton sheet will absolutely equal to the pattern.
There is a rubber rebber reqair device with machine,the rubber can be used after be repaired.
