产品型号：JSY0202
产品名称：液化石油气密度测定器JSY0202
产品说明：
JSY0202液化石油气密度测定器（压力密度计法）
一、符合SH/T0221、ISO3993标准
二、主要技术参数：
试验温度：15℃或20℃
控温精度：±0.2℃
控温方式：数显温控仪自动控温
功 率： 1.3 KW
压力指示：指针压力表显示
致冷方式：进口压缩机致冷
工作电源： AC220V±10% 50HZ
三、性能及特点：
1、采用进口数显温控仪控制恒温浴温度，控制精度高，温度显示直观。
2、恒温浴采用电热管加热和进口压缩机致冷方式控制温度，既能升温又能降温，确保恒温浴温度能恒定在15℃或20℃。
3、密度计圆筒和恒温浴前端均用有机玻璃制成，恒温浴后有照明灯，在恒温浴水浴中就能观察到圆筒内密度计读数，方便操作。
4、采用磁力循环泵循环搅拌，确保恒温浴内温度均匀，以及恒温无振动。
JSY0202 Liquefied Petroleum gas densitometer (pressure densitometer method)
I. It conforms to SH/T0221 and ISO3993 standards
Ii. Main Technical parameters:
Test temperature: 15℃ or 20℃
Temperature control accuracy: ±0.2℃
Temperature control mode: Digital display temperature controller automatically controls temperature
Power rate: 1.3kW
Pressure indicator: pointer pressure gauge display
Refrigeration mode: refrigeration by imported compressor
Power supply: AC220V±10% 50HZ
Iii. Performance and Characteristics:
1. Adopt imported digital display temperature controller to control the temperature of constant temperature bath, with high control precision and intuitive temperature display.
2. The constant temperature bath adopts electric heat pipe heating and import compressor cooling mode to control the temperature, which can both heat up and cool down, ensuring that the constant temperature of the constant temperature bath can be kept at 15℃ or 20℃.
3, the densitometer cylinder and the front end of the constant temperature bath are made of plexiglass, after the constant temperature bath light, in the constant temperature bath water bath can be observed in the cylinder densitometer reading, easy to operate.
4. Magnetic circulating pump is adopted to circulate and stir to ensure uniform temperature in constant temperature bath and no vibration at constant temperature.
