石油和合成液水分离性测定仪(JSH0202)

JSH0202石油和合成液水分离性测定仪

一、符合GB/T7305、ASTMD1401、ISO6614标准

二、主要技术参数

控温方式：进口数显温控仪自动控温

控温范围：常温～82℃   

控温精度：±0.5℃

水浴尺寸：φ300×300（mm） 玻璃缸

试验孔数：5孔          

功    率：2 KW

试样搅拌：1500±15转/分（数显计速）

计时方式：数显时间计时器

工作电源： AC220V±10%   50Hz

三、性能及特点

1、采用进口温控仪自动控温，显示直观清晰，可在常温到100℃内选择任意一点温度，控温准确；

2、采用电热管加热，加热速度快，使用寿命长；

3、用来搅拌试样的搅拌电机转速为1500±15转/分，且保证搅拌叶片最下端摆动小于1mm；

4、采用智能数显计测器进行计时和计速，显示直观，操作方便；

5、在工作时可同时插入五支量筒，当支搅完后，可旋转搅拌头圆盘，让电机搅拌第二支量筒内的试样，完后同样再搅拌第三支量筒内的试样，依此类推。

JSH0202 oil and synthetic liquid water separation tester

One, in line with GB/T7305, ASTMD1401, ISO6614 standard

Ii. Main technical parameters

Temperature control mode: Automatic temperature control with imported digital display temperature controller

Temperature control range: normal temperature ~ 82℃

Temperature control accuracy: ±0.5℃

Water bath size: 300×300 (mm) glass cylinder

Number of test holes: 5

Power rate: 2 KW

Sample mixing: 1500±15 RPM (digital display speed)

Timing: Digital display time timer

Power supply: AC220V±10% 50Hz

Iii. Performance and Characteristics

1. Adopt the imported temperature controller to automatically control the temperature, the display is intuitive and clear, and the temperature can be selected at any point within the normal temperature to 100℃, and the temperature control is accurate;

2, using electric heat pipe heating, heating speed, long service life;

3. The speed of the stirring motor used for stirring samples is 1500±15 RPM, and the oscillation of the lowest end of the stirring blade is guaranteed to be less than 1mm;

4. Using intelligent digital display meter for timing and speed measurement, intuitive display, easy operation;

5. When working, five measuring cylinders can be inserted at the same time. After the first one is stirred, the agitator head disk can be rotated so that the motor can stir the samples in the second measuring cylinder.