时间-计数控制器，通过精确测量触发事件间的时间间隔，将时间转换为数字量计数。IDQ提供的时间-计数控制器包括时间戳标记位、TCSPC模块、延迟发生器、滤波和计数等功能模块，配合相关软件可实现量子通信、飞行时间测量、荧光寿命测量等应用需求。
主要指标：
Parameter | High Speed mode | High Resolution mode | Units |
Input channels | 4 + Start | 4 | - |
Bin width | 100 | 13 | ps |
Time jitter (RMS) | <100 | 8 | ps |
Dead-time | <4 | 5 | ns |
Maximum processing rate (per channel) | 100 | 25 | Mevents/s |
Max input voltage range | -3 | 3 | V |
Output delay steps | 100 | ps | |
Count rate | 1 | GHz | |
Discriminator range | -2 to 2 | V | |
Discriminator steps | 1 | mV | |
Output channel number | 4 | - | |
Output pulse format | NIM or TTL | - | |
Output max frequency | 125 | MHz | |
Output pulse min width (TTL) | 6 | ns | |
Output pulse min width (NIM) | 1 | ns | |
Maximum transfer rate to PC | 10* | Mevents/s | |
Maximum delay generation (typical) | 1 | ms | |
Power Supply | 100-240V;1-2.5A; 50-60Hz | ||
Operating conditions | 5°-40° ; 80% humidity up to 31°C and 50% up to 40°C | ||
Applicable standards | Safety: EN 61010-1:2010, AMD1:2016 | ||
CSA C22.2 61010-1-12/UL 61010-1:2012 | |||
EMC: EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011 | |||
EN 61326-1:2013 | |||
* Hardware ready for 100 Mevent/s | |||
原理架构：
应用功能框图
软件界面
ID900 Time Controller Series
