北京北广精仪仪器设备有限公司
介电常数介质损耗试验仪
介电常数介质损耗试验仪：GDAT-A
介电常数介质损耗试验仪满足标准：GBT 1409-2006测量电气绝缘材料在工频、音频、高频（包括米波波长在内）下电容率和介质损耗因数的*方法
GDAT-A
介电常数介质损耗试验仪的详细资料：
一、 介电常数介质损耗试验仪概述
介质损耗和介电常数是各种电瓷、装置瓷、电容器等陶瓷，还有复合材料等的一项重要的物理性质，通过测定介质损耗角正切tanδ及介电常数（ε），可进一步了解影响介质损耗和介电常数的各种因素，为提高材料的性能提供依据；仪器的基本原理是采用高频谐振法，并提供了，通用、多用途、多量程的阻抗测试。它以单片计算机作为仪器的控制，测量核心采用了频率数字锁定，标准频率测试点自动设定，谐振点自动搜索，Q值量程自动转换，数值显示等新技术，改进了调谐回路，使得调谐测试回路的残余电感减至zui低，并保留了原Q表中自动稳幅等技术，使得新仪器在使用时更为方便，测量值更为精确。仪器能在较高的测试频率条件下，测量高频电感或谐振回路的Q值，电感器的电感量和分布电容量，电容器的电容量和损耗角正切值，电工材料的高频介质损耗，高频回路有效并联及串联电阻，传输线的特性阻抗等。 beiguangjy.com
介电常数介质损耗试验仪用于科研机关、学校、工厂等单位对无机非金属新材料性能的应用研究。
二、介电常数介质损耗试验仪的技术指标
1．Q值测量
a．Q值测量范围：2～1023。
b．Q值量程分档：30、100、300、1000、自动换档或手动换档。
c．标称误差
项 目
GDAT-A
频率范围
20kHz～10MHz；
固有误差
≤5％±满度值的2％；
工作误差
≤7％±满度值的2％；
频率范围
10MHz～60MHz；
固有误差
≤6％±满度值的2％；
工作误差
≤8％±满度值的2％。
2．电感测量范围：14.5nH~8.14H
3．介电常数介质损耗试验仪电容测量：1~ 460
项 目
GDAT-A
直接测量范围
1～460pF
主电容调节范围
准确度
30～500pF
150pF以下±1.5pF；
150pF以上±1％
注：大于直接测量范围的电容测量见使用规则
4．介电常数介质损耗试验仪信号源频率覆盖范围
项 目
GDAT-A
频率范围
10kHz～50MHz
频率分段
（虚拟）
10～99.9999kHz
100～999.999kHz
1～9.99999MHz
10～60MHz
频率指示误差
3×10-5±1个字
5．Q合格指示预置功能
预置范围：5～1000。
6．Q表正常工作条件
a. 环境温度：0℃～+40℃；
b．相对湿度：<80％；
c．电源：220V±22V，50Hz±2.5Hz。
7．其他
a．消耗功率：约25W；
b．净重：约7kg；
c. 外型尺寸：（l×b×h）mm：380×132×280。
8．产品配置：
a.测试主机一台；
b.电感9只；
c.夹具一套
电感：
线圈号 测试频率 Q值 分布电容p 电感值
9 100KHz 98 9.4 25mH
8 400KHz 138 11.4 4.87mH
7 400KHz 202 16 0.99mH
6 1MHz 196 13 252μH
5 2MHz 198 8.7 49.8μH
4 4.5MHz 231 7 10μH
3 12MHz 193 6.9 2.49μH
2 12MHz 229 6.4 0.508μH
1 25MHz，50MHz 233，211 0.9 0.125μH
北广公司其它绝缘材料检测仪器:
BDJC-0-100KV 介电击穿试验仪
BDJC系列绝缘材料工频率介电击穿试验仪
BDJC系列电压介电强度试验仪器
BDJC系列 电压击穿试验仪
BDJC系列绝缘漆漆膜击穿强度试验仪
BDJC电容器纸工频电压击穿试验仪
EST-121 体积表面电阻率测定仪
GDAT-A介质损耗测试仪/介电常数测试仪
GDAT-C新型介电常数介质损耗测试仪
BDH 耐漏电起痕试验仪
BDH-B耐电弧试验仪
中国检测行业与验证服务的*者和智领者，帮助众多检测质检单位和学校教研单位提供一站式的全面质量解决方案。
注重每一个细节是北广公司对于每个客户的承诺 ， 也是北广公司一直追求的宗旨。
Dielectric constant dielectric loss tester
Dielectric constant dielectric loss tester: GDAT-A
Dielectric constant dielectric loss tester to meet standards: GBT 1409-2006 measurement of electrical insulating materials at power, audio frequency, high frequency （ including meter wavelengths ） of the permittivity and dielectric loss factor of the recommended method
GDAT-A
Dielectric constant dielectric loss tester details:
One, the dielectric constant dielectric loss tester overview
Dielectric loss and dielectric constant are all kinds of porcelain, porcelain, ceramic capacitor device, and composite materials is an important physical properties, by measuring the dielectric loss tangent of dielectric constant （ Tan δ andε）, to further understand the effects of dielectric loss and dielectric constant of the various factors, in order to improve the material the property basis; instrument basic principle is the use of high frequency resonance method, and provides, universal, multi-purpose, multiple range impedance test. It uses single-chip computer as the control core of measuring instrument, using the frequency locking, frequency standard test point automatic setting, resonant point automatic search, Q value range automatic conversion, numerical display and other new technology, improved the tuning circuit, the tuning circuit for testing the residual inductance is reduced to the minimum, and retains the original Q table in the automatic amplitude stabilizer technology, makes the new instrument in the use of more convenient, measurement is more accurate. Instrument in high frequency test conditions, measurement of high frequency inductive or resonant loop of the Q value, the inductance of the inductor is the amount and distribution of capacitance, capacitance and loss angle tangent value of electrical materials, dielectric loss in high frequency, high frequency circuit in parallel and series resistance, the characteristic impedance of the transmission line and so on.
Dielectric constant dielectric loss tester used in scientific research institutions, schools, factories and other units to inorganic metalloid new material property application research.
In two, the dielectric constant dielectric loss tester technical index
1.Q measurement
A.Q measurement range: 2～ 1023.
The b.Q value range profile: 30, 100, 300, 1000, automatic or manual shift.
Nominal error C.
Item
GDAT-A
Frequency range
20kHz - 10MHz;
Intrinsic error
= 5%±full scale value 2%;
Operating error
= 7%±full scale value 2%;
Frequency range
10MHz - 60MHz;
Intrinsic error
= 6%±full scale value 2%;
Operating error
= 8%±full scale value 2%.
The 2 inductance measurement range: 14.5nH~8.14H
A 3 dielectric constant dielectric loss tester capacitance measurements: 1~ 460
Item
GDAT-A
Measuring range
1 - 460pF
The main capacitor adjustable range
Degree of accuracy
30 - 500pF
The following 150pF± 1.5pF;
150pF or + 1%
Note: larger than direct measurement range of the capacitance measurement see using rules
A 4 dielectric constant dielectric loss tester signal source frequency coverage
Item
GDAT-A
Frequency range
10kHz - 50MHz
Frequency segmentation
（ virtual ）
10 - 99.9999kHz
100 - 999.999kHz
1 - 9.99999MHz
10 - 60MHz
Frequency indication error
3 x 10-5 ±1 words
5.ualified instructions preset function
Preset range: 5～ 1000.
Table 6.Q the normal working conditions
A. environment temperature: 0 ℃~ +40 ℃;
Relative humidity: <80% b.;
Power supply: C. 220V± 22V, 50Hz ±2.5Hz.
7 other
A. power consumption: about 25W;
Net weight: B. about 7kg;
Size: C. （ L× B× h ）× 132 mm:380× 280.
8 product configuration:
The A. test host a;
B. inductance 9;
C. jig set
Inductance:
Coil test frequency distributions of Q values of P inductance capacitance
9 100KHz 989.4 25mH
8 400KHz 13811.4 4.87mH
7 400KHz 20216 0.99mH
6 1MHz 19613252 μ H
5 1988.7 49.8 μ H 2MHz
4 4.5MHz 231710 μ H
3 1936.9 2.49 μ H 12MHz
2 2296.4 0.508 μ H 12MHz
1 25MHz, 0.125μ H 50MHz 2332110.9
Canton company other insulating materials testing instruments:
BDJC-0-100KV dielectric breakdown testing instrument
BDJC series insulating materials at power frequencies of dielectric breakdown test instrument
BDJC series voltage dielectric strength test apparatus
BDJC series voltage breakdown testing instrument
BDJC series insulating paint film breakdown strength tester
BDJC capacitor voltage breakdown testing instrument
EST-121 volume surface resistivity measuring instrument
GDAT-A dielectric loss tester / dielectric constant test
GDAT-C model dielectric constant dielectric loss tester
BDH leakage resistance tester
BDH-B arc resistance tester
China Inspection and certification services tip and inlectual leader, helped many testing quality inspection units and schools and research units to provide comprehensive one-stop quality solutions.
Pay attention to every detail is Canton company for each customer commitment, and North Canton company has been pursuing the aim of. Beijing North Canton precision instrument equipment limited www.beiguangjy.com
