与众不同的特点:
1、模板中心厚
模板在夹紧模具的部位,具有足够的厚度，以保证对模具进行有效的夹紧和支撑。在非支撑部位做整体强度配合，达到模板整体夫人均衡稳定，减少模板变形，提高成型质量，保护模具，延长模具使用命。
有一些传统的老式结构往往在支撑模具的中心部位比较薄弱，在非支撑的模板边缘做加强筋结构，这样模板看上去比较厚，造成一个可靠的假象，但实际效果并不理想。
Platen center is thick enough
The enough thickness of platen clamping part ensures that the mold is clamped and supported effectively. Entire strength cooperation in unsupported part guves mold overall balance and stability, reduces platen deformation, improves moulding quality, protects mold, and extends mold's service life.
Some traditional old-type structure is weak in the platen center for mold supporting. Instead of that,
it applies reinforcing rib structure in unsupporetd platen edge. So the platen looks thick and makes a reliable illusion, but the actual effect is not so good.
2、连体连杆
前连杆全部采用整体连体结构，大幅度提高了连杆的强度，同时也提高整个锁模机构的刚性和精度。
Linking connecting rod
Linkage structure of front connecting rod increases connecting rod's strength greatly, as well as the whole clamping unit's rigidity and uracy.
3、增强的头板
头板中心孔部位对模具有着重要的支持作用，我们采用自主结构的支撑加强筋，对模具中心的支撑效果有效提高，有利于提高成型质量和稳定性。
Enhanced stationary platen
The central hole part of the stationary platen is significant in supporting function. Our selfowned patent of the reinforcing rib supports mold center effectively,favors moulding quality and stability.
4、特殊定制优化的控制系统
根据我们10余年专业经验，再结合控制系统供应商的控制技术，定制开发出控制程序，以提高机台整体性能。
Special customized and optinized control system
ording to our more than ten years professional experience and control system supplier's technique, we develop specialized and customized control program to improve machine's overall performance.
5、含油铜套的射台后板
每一次注射动作，射台后板都要进行一次往复动作。注射部分的润滑通常是非自动润滑，这样就造成了这个重要动作没有润滑支持，因此，我们采用含油材料的铜套，可以不需要润滑油的支持也能有良好的滑动效果，这样可以保证良好的注射往复动作。
一些因为考虑成本而采用的非含油材质，在使用过一段时间后往往会对注射动作的精度产生不良影响。
Injection preplastication seat with oilcopper sleeve
The preplastiction seat reciprocates once in every injection motion. Normal non-automatic lubrication in injection unit can't offer lubrication support to this important motion. Thus, we use oil copper sleeve to make sure that injection reciprocates well. Even without lubricating oil support, it can also slide excellently.
Considering cost, however, some materials without oil always cause hamful effect to injection uracy adder a period of time.
6、封闭的底箱结构
整体的底箱采用封闭式结构，和开放式结构相比较，封闭式结构的机台更整洁，并且可以更好的保护机器元器件不被碰伤，也提高了操作员工的作业安全。
Closed base structrue
Compared with opened structure, the closed base structure is neater and protects components better to avoid any damage by crash. It also improves operation safety.
7、自动调模
具有自动调模装置，便于用户操作。
Automatic mould adjustment
Automatic mould adjustment device is convenient for customer operation.
8、锥面密封结构
高压油管的连接全部采用与同步的锥面密封结构，大幅度提高密封可靠性。
Sealed structure with cone surface
In line with famous international brands, sealed structure with cone surface in connection position of high pressure oil pipe improves sealing reliability greatly.
9、油箱喷塑
油箱进行喷塑，确保油箱的清洁，更重要的是可以保障油箱*不被腐蚀，有效延长液压油的使用时间，降低用户的使用成本。
Spray plastic in oil tank
Spray plastic in oil tank makes it clean, and what's more, it prevents oil tank to be corroded for long time, extends hydraulic oil service time effectively, and decreases customer's use-cost.
10、容积式稀油润滑
容积式结构，确保了每个润滑点的均匀润滑，避免了润滑油分配不均匀而导致的润滑失效，为机台的*良好运转提供保障。
The device to transit thin lubrication oil in volume style
The volume structure lubricates each point homogeneously, avoids lubrication invalidation due to unhomogeneous distribution, then guarantess machine's long well running.
11、螺杆测速
具有螺杆测速装置，便于用户操作。
Screw rotational speed detection
Screw rotational speed detection device is convenient for customer operation.
12、双射移油缸射台拉紧结构
采用两个平行的射移油缸来拉动射台并使喷嘴与模具夹紧，消除了单个油缸拉紧时产生的倾倒扭矩，减少了料筒与螺杆的变形，使料筒螺杆的使用寿命延长，塑化效果优化。
Double movable hydraulic cylinders tightening structure
Two parallel movable hydraulic cylinders pull injection table to tighten nozzle and mold. It eliminates oblique torque when single cylinder is tightened, diminishes deformation of screw and barrel,meanwhile, it extends life of screw and barrel, optimizes plasticizing effect.
13、优质黄铜导向套
拉杆导向部位全部采用优质黄铜套，更有效的保护拉杆，提高拉杆的使用寿命。
Copper bush with high quality
Full application of the high quality copper bush in tie bars guiding part protects tie bars effectively and prolongs their service life.
14、转换数量式连杆结构
通过连杆数量的转换，实现了模板上的锁轴都不转动的目的，这样可以有效降低模板部分的损耗，保护了重要零件，降低用户今后的维护成本。
Number conversion linkage structure
On purpose of keeping lock shaft on platen nonrotated, we convert connecting rod number. In that way, the loss of platen and the future maintenance cost of customer decline effectively, at the same time, it protects the crucial components.
