GM-1350型瓦楞纸板全自动圆压圆模切机采用世界 的前缘送纸系统，送纸精度高、、送纸轮寿命长，送纸实现10000张/小时，精度±0.5mm。
GM-1350型瓦楞纸板全自动圆压圆模切机的版台和压切机构两者的工作部分都是圆筒形的，工作时，送纸辊将纸板送到模压版滚筒与压力滚筒之间，由两者将其夹住对滚筒进行模切，模切版滚筒旋转一周，就是一个工作循环。
由于瓦楞纸板全自动圆压圆模切机工作时滚筒连续旋转，因而其生产效率是各类模切机中高的。但是模切版要弯成曲面，制版比较麻烦，成本也比较高，技术上有 的难度。所以，瓦楞纸板全自动圆压圆模切机常用于大批量生产。
GM-1350 type of corrugated cardboard automatic rotary die-cutting machine adopts the world advanced front paper feeding system, paper feeding high precision, speed, paper feeding wheel life long, send paper to achieve 10000 / hour, the accuracy of 0.5mm.
GM-1350 type of corrugated cardboard automatic rotary die-cutting machine version and pressing and cutting mechanism of both the working part is cylindrical, work, send paper and paper board sent to molded version of the rollers and pressure between the rollers, by both the the clipped to the cylinder die-cutting, die-cutting, drum rotation turn a week, is a cycle of work.
Due to the corrugated automatic rotary die-cutting machine drum to rotate continuously, thus the production efficiency is the highest in all kinds of die cutting machine. But the die cutting version to be curved surface, plate making more trouble, the cost is relatively high, there is a certain technical difficulty. So, the corrugated board automatic rotary die-cutting machine is commonly used for mass production.
GM-1350型瓦楞纸板全自动圆压圆模切机模切部：
1、模切辊为优持钢材质，壁厚30mm，平衡校正，镀硬铬。
2、墙板为铸铁材质，壁厚50mm，大型加工 制作。
3、软辊自动修磨机构提高胶套重复使用率，可修磨3-4次。
4、线速度自动补偿每一批纸箱的模切尺寸一致。
5、 聚胺脂软切胶套，安装方便，模切1200万次。
6、机械式软辊左右横向移动40mm，胶垫磨损均匀。
7、六级精磨齿轮采用40cr材质，噪音低，使用寿命长。
8、模切辊汽缸式自动分离装置，减少胶套磨损。
GM-1350 type corrugated board automatic rotary die-cutting machine die cutting part:
1, die cutting roller for the excellent steel material, wall thickness 30mm, balance correction, hard chrome plating.
2, the wall plate for the quality of cast iron material, wall thickness of 50mm, large processing center production.
3, the soft roller automatic repair mechanism to improve the rubber sleeve reuse rate, can be repaired 3-4 times.
4, linear speed automatic compensation to ensure that each batch of cartons of die cutting size is exactly the same.
5, imported polyurethane soft cut rubber sleeve, convenient installation, die cutting 12 million times.
6, mechanical soft roll around the horizontal movement of 40mm, rubber pad wear evenly.
7, six fine grinding gear using 40Cr material, low noise, long life.
8, die cutting roller cylinder type automatic separation device, reduce rubber sleeve wear.
GM-1350型瓦楞纸板全自动圆压圆模切机技术参数：
| 型 号 | 大过纸（mm） | 小过纸（mm） | 过纸厚度 | 过纸速度（片/分） | 主电机功率 | 机器重量 |
| GM 17A | 1700×1200 | 350×500 | 11mm | 30-120 | 4.0kw | 4500kg |
| GM 17A | 2000×1200 | 350×500 | 11mm | 30-120 | 5.5kw | 5000kg |
| GM 20B | 2100×1400 | 400×600 | 11mm | 50-160 | 7.5kw | 5500kg |
| GM 25C | 2400×1400 | 400×600 | 11mm | 50-160 | 7.5kw | 6000kg |
| GM 25C | 2500×1400 | 500×600 | 11mm | 30-100 | 11.0kw | 7000kg |
